Reference Guide

CommandRegister The current contents of the
register that provide basic control
over the device’s ability to
respond to, and/or perform PCI
accesses. The data in the
capabilities array is gathered from
the PCI status register and the
PCI capabilities list as defined in
the PCI specification.
Values for the CommandRegister
property are:
0 - Unknown
1 - Other
2 - Supports 66 MHz
3 - Supports user-definable
features
4 - Supports fast back-to-back
transactions
5 - PCI-X capable
6 - PCI power management
supported
7 - Message signaled interrupts
supported
8 - Parity error recovery capable
9 - AGP supported
10 - Vital product data supported
11 — Provides slot identification
12 - Hot swap supported
uint16
CIM_PCIDevice
The CIM_PCIDevice class shown in Table below describes the capabilities and management of a PCI
device controller on an adapter card.
50