Connectivity Guide

MIB Name Agent / Hardware Supported Purpose of the MIB
instrumentation software. This is the primary
MIB for PowerEdge systems.
dcs3fru.mib Server Administrator Provides the information about the system
Field Replaceable Unit (FRU) to SNMP
management applications.
dcstorag.mib Server Administrator Storage
Management
Provides the information about the storage
hardware components and RAID
configurations monitored by Server
Administrator.
iDRAC-SMIv1.mib iDRAC7 and iDRAC 8 Provides information about the SNMP data
and traps supported by iDRAC7 and iDRAC8.
This is the SMIv1 version of the iDRAC MIB.
iDRAC-SMIv2.mib iDRAC7 and iDRAC 8 Provides information about the SNMP data
and traps supported by iDRAC7 and iDRAC8.
This is the SMIv2 version of the iDRAC MIB.
dcs3rmt.mib Dell Remote Access controller 5
(DRAC 5)
Provides information about remote access
components monitored by the Server
Administrator Remote Access Service.
rac_host.mib Remote access out-of-band
agent
Provides information about the components
monitored by the remote access out-of-
band software agent.
DELL-RAC-MIB.txt Chassis Management Controller
(CMC)
Provides information about components
monitored by the Chassis Management
Controller for modular chassis. This MIB is
the legacy iDRAC MIB. Changes made in this
MIB are not for iDRAC. iDRAC does not
support all the objects and traps defined in
this MIB. The new and more extensive iDRAC
MIB is available for iDRAC7 and later
versions.
DcAsfSrv.mib Baseboard Management
Controller (BMC)
Provides information about Dell server
Platform Event Traps generated by the
Baseboard Management Controller.
For further details see Release Notes for Management Information Base readme_mibs.txt.
Server Administrator Remote Access MIB
NOTE: This section contains information that is applicable only if the Server Administrator is
installed in the system.
The Server Administrator Remote Access MIB ( filename dcs3rmt.mib ) provides in-band information
about remote access hardware that may be present in your system.
The Server Administrator Remote Access MIB structures its MIB objects into groups of scalar objects or
MIB tables that provide related information. Table below describes each Server Administrator Remote
Access MIB group and lists the MIB group number assigned to the MIB group. The Server Administrator
Remote Access MIB groups are identified by the SNMP OID 1.3.6.1.4.1.674.10892.1.<MIB group number>
6