Connectivity Guide

• Critical/Error — A significant event that indicates actual or imminent loss of data or loss of function,
such as crossing a failure threshold or a hardware failure.
RAC Traps
This section describes the traps that are generated by the SNMP agent of the Remote Access Controller
(RAC). All of the enterprise-specific traps documented in this section belong to the MIB enterprise
identified by OID 1.3.6.1.4.1.674.10892.2 and are sent with all of the trap variables documented in the
section. The trap variables are sent in the order in which they are listed.
NOTE: The PowerEdge M1000e CMC, PowerEdge VRTX CMC and PowerEdge FX2 CMC do not
generate the traps in this section. They generate the traps documented in the CMC Traps.
Table 120. RAC Traps
TrapID Name Description Severity Category Cause Support
ed by
RAC
Platfor
m
0 CodeStart SNMP agent is
initializing
itself
Informatio
n
Status RAC power on or reset. All
1 Authenticati
on
Failure
Request
received with
an invalid
community
name
Critical Error SNMP request with an
invalid community name.
All
1001 alertDrscTe
st TrapEvent
The RAC
generated a
test trap event
in response to
a user request
Informatio
n
Status A test SNMP trap
generated by a RAC.
All
1002 alertDrscAut
h Error
RAC
Authenticatio
n failures
during a time
period have
exceeded a
threshold
Minor Error RAC login failure caused
by authentication failure,
number of concurrent
logins exceed limit, or
permission denied.
All
1015 alertDrscSE
L
Warning The
RAC has
detected a
new event in
the System
Event Log
with Severity:
Warning
Major Error RAC detected a new
system event log with
warning severity (detailed
log info is in drsAlert
Message varbind).
All
35