Concept Guide

name=value pair 1
config=
name=value pair 2 Description
prefdnsserverv6=<value> Validates the preferred DNS server for
configuration.
config=serial
baudrate=9600 | 19200 | 38400
| 57600 | 115200
9600: Sets the connection speed to 9600 bits
per second.
19200: Sets the connection speed to 19200
bits per second.
38400: Sets the volatile and non-volatile
connection speed to 38400 bits per second.
57600: Sets the volatile and non-volatile
connection speed to 57600 bits per second.
115200: Sets the volatile and non-volatile
connection speed to 115200 bits per second.
flowcontrol=none | rtscts
none: No control over the flow of
communication through the serial port.
rtscts: RTS is ready to send and CTS is clear to
send.
mode=directbasic |
directterminal |
directbasicterminal |
modembasic | modemterminal |
modembasicterminal
directbasic: Type of messaging used for IPMI
messaging over a serial connection.
directterminal: Type of messaging that uses
printable ASCII characters and allows a limited
number of text commands over a serial
connection.
directbasicterminal: Both basic and terminal
mode messaging over a serial connection.
modembasic: Type of messaging used for IPMI
messaging over a modem.
modemterminal: Type of messaging that uses
printable ASCII characters and allows a limited
number of text commands over a modem.
modembasicterminal: Both basic and terminal
messaging over a modem.
NOTE: All commands may not be
supported on the system.
privilegelevel=administrator |
operator | user
administrator: Sets the maximum privilege
level that are accepted on a serial connection,
to Administrator.
operator: Sets the maximum privilege level
that are accepted on a serial connection, to
Operator.
95