Concept Guide

name=value pair 1
config=
name=value pair 2 Description
NOTE: The primarynw option is supported
from PowerEdge12G systems onward. If
the primarynw is set to dedicated, then set
failovernw to none.
NOTE: If the primarynw is set to
dedicated, then set failovernw to none.
failovernw=none | lom1 | lom2 |
lom3 | lom4 | all
none: Configures the failover network to none.
lom 1: Configures the failover network to lom
1.
lom 2: Configures the failover network to lom
2.
lom 3: Configures the failover network to lom
3.
lom 4: Configures the failover network to lom
4.
all: Configures the failover network to all loms.
NOTE: The failovernw option is supported
on PowerEdge12G systems onward.
Configure both primarynw and failovernw
to set the nicselection. The primarynw and
failovernw options cannot have the same
value.
NOTE: Configure both primarynw and
failovernw to set the nicselection. The
primarynw and failovernw options cannot
have the same value.
NOTE: Failovernw requires license to
configure the ports. If the appropriate
license is not installed or has expired, the
system displays an error message. For
more information, see Dell License
Manager at dell.com/
openmanagemanuals.
ipaddress=IP
Sets the IP address if you have selected static
as the IP address source for the BMC LAN
interface.
subnet=Subnet Sets a subnet mask if you have selected static
as the IP address source for the BMC LAN
interface.
gateway=Gateway
Sets a gateway address if you have selected
static as the IP address source for the BMC LAN
interface.
93