Concept Guide

Group name=value pair 1 attribute= name=value pair 2 setting=
NOTE: The option is
supported only on 13G and
later systems.
attribute=ProcConfigTdp
NOTE: The option is
supported only on 13G and
later systems.
setting=Nominal | Level1 | Level2
attribute=ProcATS setting=Enabled | Disabled
NOTE: The option is read-only if
ProcVirtualization is set to Disabled.
attribute=ProcX2Apic
NOTE: The option is
supported only on 13G and
later systems.
setting=Enabled | Disabled
NOTE: The option is read-only if
ProcVirtualization is set to Disabled.
SATA Settings attribute=EmbSata setting=Off | AtaMode | RaidMode | AhciMode
attribute=eSataPort1 setting=Off | Auto
attribute=eSataPort1Capacity setting=<string>
attribute=eSataPort1DriveType setting=<string>
attribute=eSataPort1Model setting=<string>
attribute=SataPortA - SataPortJ setting=Off | Auto
attribute=SataPortACapacity -
SataPortJCapacity
setting=<string>
attribute=SataPortADriveType -
SataPortJDriveType
setting=<string>
attribute=SataPortAModel -
SataPortJModel
setting=<string>
attribute=SecurityFreezeLock setting=Enabled | Disabled
attribute=WriteCache setting=Enabled | Disabled
Serial
Communication
attribute=ConTermType setting=Vt100Vt220 | Ansi
attribute=ExtSerialConnector setting=Serial1 | Serial2 | RemoteAccDevice
attribute=FailSafeBaud setting=115200 | 57600 | 19200 | 9600
attribute=RedirAfterBoot setting=Enabled | Disabled
attribute=SerialComm setting=OnNoConRedir | OnConRedirCom1 |
OnConRedirCom2 | Off
78