Concept Guide

NOTE: If you have configured the setup password, then, always set the same password when you

configure any BIOS settings.

Table 22. BIOS Setup Settings on PowerEdge12G and later systems

Group name=value pair 1 attribute= name=value pair 2 setting=

BIOS Option

Settings

attribute=BootSeq sequence=aliasname1, aliasname2,..... aliasnameN

attribute=HddSeq sequence=aliasname1, aliasname2,..... aliasnameN

Boot Settings attribute=BootMode setting=Bios | Uefi

attribute=BootSeqRetry setting=Enabled | Disabled

attribute=HddFailover

NOTE: The option is

supported only on 13G and

later systems.

setting=Enabled | Disabled

attribute=SetBootOrderFqdd1–

SetBootOrderFqdd16

NOTE: The option is

supported only on 13G and

later systems.

setting=<string>

attribute=SetLegacyHddOrder

Fqdd1–

SetLegacyHddOrderFqdd16

NOTE: The option is

supported only on 13G and

later systems.

setting=<string>

Integrated

Devices

attribute=EmbVideo setting=Enabled | Disabled

attribute=IntegratedNetwork1 setting=Enabled | DisabledOs

attribute=IntegratedNetwork2 setting=Enabled | DisabledOs

attribute=IntegratedRaid setting=Enabled | Disabled

attribute=IntegratedSas setting=Enabled | Disabled

attribute=InternalSdCard setting=On | Off

attribute=InternalSdCardRedun

dancy

setting=Mirror | Disabled

attribute=InternalUsb setting=On | Off

attribute=IoatEngine setting=Enabled | Disabled

attribute=OsWatchdogTimer setting=Enabled | Disabled

attribute=SriovGlobalEnable setting=Enabled | Disabled