Concept Guide

or
omreport mainsystem temps index=n
The index parameter is optional. If you do not specify the index, Server Administrator displays a summary
of status, readings, and thresholds set for any temperature probes that are present on the system. If you
specify the index, Server Administrator displays the summary for a specific temperature probe.
NOTE: On servers in the Dell PowerEdge FX2 series chassis, this command is supported only if the
Chassis Management at Server Mode is set to either Monitor or Manage and Monitor in the CMC,
and Server Administrator displays the Chassis Management at Server Mode as Enabled. For more
details, see Chassis Management.
Omreport Chassis Volts Or Omreport Mainsystem Volts
Use the omreport chassis volts or omreport mainsystem volts command to view properties of the
system’s voltage probes. Type:
omreport chassis volts index=n
or
omreport mainsystem volts index=n
The index parameter is optional. If you do not specify the index, Server Administrator displays a summary
of status, readings, and thresholds set for any voltage probes that are present on the system. If you
specify the index, Server Administrator displays a summary for a specific voltage probe.
Omreport Licenses
Use the omreport licenses command to view the digital licenses of the hardware devices installed on the
system. Type:
omreport licenses
The following is an example output from the omreport licenses command:
Device Index : 0
Device Status : Ok
Device : iDRAC7
Device Description : iDRAC
Device ID : xxxx
License Index : 0
Description : iDRAC7 Enterprise Evaluation License
Status : OK
Recommended Action : N/A
License Type : Evaluation
EntitlementID : xxxx
42