Concept Guide

Speed : 0.75 ns

Rank : Dual

Failures : None

NOTE: To maintain consistency across the commands, the output format of this command and the

subsequent command levels has changed. Change the user scripts as applicable.

Omreport chassis nics or omreport mainsystem nics

Use the omreport chassis nics or omreport mainsystem nics command to view NIC and Team interface

details. On XenServer, the command displays all the installed NICs, regardless of driver installation.

NOTE: The order in which devices are detected is not guaranteed to match the physical port

ordering of the device.

To view NIC properties, type:

omreport chassis nics index=n

The index parameter is optional. If you do not specify the index, Server Administrator displays properties

of all NICs on the system and the values for the following fields: Index (NIC card number), Interface

Name, Vendor, Description, Connection Status, and Slot.

If you specify the index, Server Administrator displays properties for a specific NIC and the values for the

following fields: Physical Interface, Interface, IPv4 Addresses, IPv6 Addresses, Physical Interface Receive

Statistics, Physical Interface Transmit Statistics, Interface Receive Statistics, and Interface Transmit

Statistics.

NOTE: The Fibre Channel over Ethernet (FCoE) and iSCSI over Ethernet (iSCSI Offload Engine)

features of Converged Network Adapter (CNA) cards are not supported on VMware ESX and

VMware ESXi systems.

To view Team interface properties, type:

omreport chassis nics config=team index=n

omreport mainsystem nics config=team index=n

NOTE: This command is applicable only if Team interface is configured in the system. Team

interface is configured using NIC vendor tools, such as Broadcom.

NOTE: On systems running Linux operating systems with kernel versions earlier than 3.10, Team

Interface speed is not displayed.

The index parameter is optional. If you do not specify the index, Server Administrator displays details of all

the Team interfaces on the system and the values for the following fields: Index (NIC card number),

Interface Name, Vendor, Description, and Redundancy Status.

If you specify the index, Server Administrator displays the Team interface details for the specific NIC and

the values for the following fields: Team Interface, Interface, IPv4 Addresses, IPv6 Addresses , Team