Concept Guide

Celsius. Specifying that only the enclosure is shut down during excessive temperatures is known as Smart
Thermal Shutdown. For more information about Smart Thermal Shutdown, see the Dell OpenManage
Online Help.
Description Enables smart thermal shutdown.
Syntax
omconfig storage globalinfo action=enablests
Example to Enable thermal shutdown. The omconfig command syntax for enabling thermal
shutdown does not require a controller or enclosure ID.
NOTE: You can use the omreport storage globalinfo command to
determine whether smart thermal shutdown is currently enabled or
disabled. The status of smart thermal shutdown is also displayed by the
Server Administrator graphical user interface (GUI). To locate this status,
select the Storage object and the Information/Configuration tab.
Example
omconfig storage globalinfo action=enablests
Omconfig Global Disable Smart Thermal Shutdown
If you have previously enabled smart thermal shutdown using the omconfig command, you can disable
smart thermal shutdown and return the system to its default setting. When smart thermal shutdown is
disabled, the operating system and the server shuts down when the PV220S and PV221S enclosures reach
a critical temperature of 0 or 50 degree Celsius.
Description Disables smart thermal shutdown for all controllers.
Syntax
omconfig storage globalinfo action=disablests
Example to Disable thermal shutdown. The omconfig command syntax for disabling
thermal shutdown does not require a controller or enclosure ID.
NOTE: You can use the omreport storage globalinfo command to
determine whether smart thermal shutdown is currently enabled or
disabled. The status of smart thermal shutdown is also displayed in the GUI
of Server Administrator. To locate this status, select the Storage object and
the Information/Configuration tab.
Example
omconfig storage globalinfo action=disablests
Omconfig Global Rescan Controller
Description Rescans all the controllers on the system. For more information about Global
Rescan Controller, see the Dell OpenManage Online Help.
Syntax
omconfig storage globalinfo action=globalrescan
Example to Do a global rescan of all controllers. The omconfig command syntax for
rescanning all controllers on the system does not require a controller or
enclosure ID.
204