Concept Guide

Example
to
Sets the patrol read on controller 1 to manual mode
Example
omconfig storage controller action= setpatrolreadmode controller=1
mode=manual
Omconfig Start Patrol Read
Descriptio
n
Starts the patrol read task on the controller.
Syntax omconfig storage controller action=startpatrolread controller=id,
where id is the controller ID as reported by the omreport storage controller command.
Example
to
Start the patrol read task on controller 1.
Example
omconfig storage controller action=startpatrolread controller=1
NOTE: To start patrol read, the current patrol read mode is set to Manual.
Omconfig Stop Patrol Read
Descriptio
n
Stops the patrol read task on the controller.
Syntax omconfig storage controller action=stoppatrolread controller=id, where
id is the controller ID as reported by the omreport storage controller command.
Example
to
Stop the patrol read task on controller 1.
Example
omconfig storage controller action=stoppatrolread controller=1
NOTE: To stop patrol read, the current patrol read mode is set to Manual.
Omconfig Create Cachecade
Descriptio
n
Creates a cachecade on the given controller.
Syntax
omconfig storage controller action=createcachecade controller=id
pdisk=<PDISKID> [name=<string>] where id is the controller ID as reported by the
omreport storage controller command and PDISKID is specified as:
pdisk=connector:enclosureID:targetID | connector:targetID
Example
to
Create a cachecade on controller 0.
196