Concept Guide

Command
Level 1
CommandLevel
2
Command Level 3 User
Privilege
Required
Use
firmware U, P, A Displays the name and version of the
firmware.
frontpanel U, P, A Displays whether the front panel button
settings, such as the Power button
and/or Nonmasking Interrupt (NMI)
button (if present on the system), are
enabled or disabled. It also displays the
front panel encryption access
information and the front panel LCD
information.
fru U, P, A Displays the Field Replaceable Unit (FRU)
information.
hwperformance U, P, A Displays the status and cause for the
system’s performance degradation.
info U, P, A Displays a status summary for main
system chassis components.
intrusion U, P, A Displays the status of the system’s
intrusion sensor(s).
leds U, P, A Displays the properties you have set for
light-emitting diodes to flash under
various alert conditions.
memory U, P, A Displays properties of the system's
memory arrays.
nics U, P, A Displays the NIC and Team interface
properties.
ports U, P, A Displays the properties for the system’s
parallel and serial ports, such as I/O
address, IRQ level, connector type, and
maximum speed.
processors U, P, A Displays properties of the system’s
processors, including speed,
manufacturer, and processor family.
pwrmanagement U, P, A Displays power inventory details such as
system idle power, system maximum
potential power, and power budget
information.
pwrmonitoring U, P, A Displays properties of power
consumption.
pwrsupplies U, P, A Displays the properties of power
supplies.
19