Concept Guide

Required Command
Levels (1, 2, 3)
Optional name=value pairs
action=replacememberdisk controller=id vdisk=id source=<PDISKID>
destination=<PDISKID>
action=rename controller=id vdisk=id
action=enablefluidcache controller=id vdisk=id devicename=<string>
cachepolicy=<wb | wt>
action=disablefluidcache controller=id vdisk=id devicename=<string>
action=reactivate controller=id vdisk=id devicename=<string>
Omconfig Check Consistency
Description
Initiates a check consistency on a virtual disk. The check consistency task verifies
the virtual disk’s redundant data.
Syntax
omconfig storage vdisk action=checkconsistency controller=id
vdisk=id, where id is the controller ID and virtual disk ID as reported by the
omreport command.
NOTE: To obtain these values, type omreport storage controller to display
the controller IDs and then type omreport storage vdisk controller=ID to
display the IDs for the virtual disks attached to the controller.
Example to Run a check consistency on virtual disk 4 on controller 1.
Example
omconfig storage vdisk action=checkconsistency controller=1
vdisk=4
Omconfig cancel check consistency
Description
Cancels a check consistency while in progress.
Syntax
omconfig storage vdisk action=cancelcheckconsistency
controller=id vdisk=id, where id is the controller ID and virtual
disk ID as reported by the omreport command.
NOTE: To obtain these values, type omreport storage controller
to display the controller IDs and then type omreport storage
vdisk controller=ID to display the IDs for the virtual disks attached
to the controller.
Example to Cancel a check consistency on virtual disk 4 on controller 1.
Example
omconfig storage vdisk action=cancelcheckconsistency
controller=1 vdisk=4
170