Concept Guide

NOTE: To convert multiple RAID to non-RAID
on a given controller, use omconfig storage
controller action=convertraidtononraid
command. For more information, see
omconfig Convert Multiple RAID To Non-
RAID.
Example to Convert RAID to non-RAID on physical disk 3 on
connector 0 of controller 1. On a SAS controller,
the physical disk resides in enclosure 2.
Example for SAS controllers
omconfig storage pdisk
action=raidtononraid controller=1
pdisk=0:2:3
Omconfig Convert Non-RAID To RAID
Description
Converts non-RAID to RAID on a physical disk.
Syntax
omconfig storage pdisk
action=convertnonraidtoraid
controller=id pdisk=<PDISKID>, where id is
the controller ID. The <PDISKID> variable specifies
the physical disk.
NOTE: To obtain these values, type omreport
storage controller to display the controller IDs
and then type omreport storage pdisk
controller=ID to display the IDs for the
physical disks attached to the controller.
NOTE: To convert multiple non-RAID to RAID
on a given controller, use omconfig storage
controller action=convertnonraidtoraid
command. For more information, see
omconfig Convert Multiple Non-RAID To
RAID.
Example to Convert non-RAID to RAID on physical disk 3 on
connector 0 of controller 1. On a SAS controller,
the physical disk resides in enclosure 2.
Example for SAS controllers
omconfig storage pdisk
action=nonraidtoraid controller=1
pdisk=0:2:3
Omconfig Set array disk cache
Description Setting the disk cache policy on the given physical disk.
Syntax
omconfig storage pdisk action=setarraydiskcache controller=id
pdisk=<PDISKID>, where PDISKID=<connector:enclosureID:portID |
connector:targetID>.
168