Concept Guide

Table 83. omreport NVMe adapter command
Required Command Levels (1, 2,
3) And name=value pair
Optional name=value pairs Use
omreport storage nvmeadapter
Displays the properties of the
NVMe adapters.
controller=id, where id is the
controller number. For example,
controller=0.
Displays the properties of all the
NVMe adapters on the specified
controller.
controller=id, nvmeid=id, where
id is the controller number and
the NVMe adapter respectively.
For example, controller=0
nvmeid=1.
Displays the properties of the
specified NVMe adapter on the
specified controller.
156