Concept Guide

Required Command Levels
(1, 2, 3)
Optional name=value pairs Use
cachecade number. For example,
controller=0 cachecade=1.
Omreport PCIe SSD Status
The following table describes the syntax for the omreport pciessd commands.
Table 81. omreport PCIe SSD Command
Required Command Levels (1, 2,
3) And name=value pair
Optional name=value pairs Use
omreport storage pciessd
Displays the properties of the
PCIe SSD subsystem.
subsystem=id Displays the properties of the
specified PCIe subsystem.
Omreport Storage Tape
The following table describes the syntax for the omreport storage tape command.
Table 82. Omreport Storage Tape Commands
Required Command Levels
(1, 2, 3)
Optional name=value pairs Use
omreport storage tape Display tape drive properties.
controller=id, where id is the
controller number. For example:
controller=0.
Displays all tape drives.
connector=id Displays all the tape drives on the
specified connector.
tape=<tape id>, where
tapeid=id=<connector:targetID>
Displays the specified tape drive.
Omreport NVMe adapter
The following table describes the syntax for the omreport nvmeadapter commands.
155