Concept Guide

omreport Virtual Disk Status
The following table describes the syntax for the omreport Virtual Disk commands:
Table 69. omreport Virtual Disk Commands
Required Command Levels (1, 2,
3)
Optional name=value pairs Use
omreport storage vdisk Displays property information for
all virtual disks on all controllers.
controller=id, where id is the
controller number. For example,
controller=0.
Displays all virtual disks on the
specified controller.
controller=id vdisk=id, where id
is the controller number and the
virtual disk number. For example,
controller=0 vdisk=1.
Displays the specified virtual disk
on the controller.
Omreport controller status
The following table describes the syntax for the omreport Controller commands.
Table 70. Omreport controller commands
Required command
levels (1, 2, 3)
Optional name=value pairs Use
omreport storage
controller
Displays property information for all controllers
attached to the system.
controller=id, where id is
the controller number. For
example, controller=0
Displays the specified controller and all attached
components such as enclosures, virtual disks,
physical disks, HHHL cards, and so on.
controller=id
info=foreignkeyids
Displays the locked foreign configuration
information for import or clear operations.
controller=id
info=pdslotreport
Displays the empty and occupied slot details of
enclosures in the controller.
NOTE: This command is not supported on
Blackplane, SCSI, and SWRAID controllers.
Omreport Enclosure Status
The following sections provide the omreport storage enclosure command syntax required to execute the
enclosure commands. The following table describes the syntax for the omreport Enclosure commands.
149