Concept Guide

name=valu
e pair 1
name=value pair 2 name=value pair 3 Description
accessconsoleredir=true |
false
true or false: Enables or disables
access to console redirection.
accessvirtualmedia=true |
false
true or false: Enables or disables
access to virtual media.
testalerts=true | false true or false: Enables or disables
test alerts.
Usage of Extipmiusergroup=custom
The following table displays the usage of extipmiusergroup=custom:
Table 32. Usage Of extipmiusergroup=custom
name=value pair 1 name=value pair 2 name=value pair 3 Description
config=user
id=user id
extipmiusergroup=custo
m
NOTE:
extipmiusergroup
user group is
available only on
the Dell 10G blade
systems.
id=user id
loginidrac=true | false true or false: Enables or
disables logging into
iDRAC.
configureidrac=true |
false
true or false: Enables or
disables configuration of
iDRAC.
Omconfig Chassis Temps Or Omconfig Mainsystem Temps
Use the omconfig chassis temps or omconfig mainsystem temps command to set warning thresholds for
temperature probes. As with other components, you can view both warning and failure threshold values,
but you cannot set failure threshold values. The system manufacturer sets the minimum and maximum
failure threshold values.
NOTE: Threshold values that you can set vary from one system configuration to another.
Valid Parameters For Temperature Warning Thresholds
The following table displays the valid parameters for setting temperature warning thresholds:
Table 33. Valid Parameters For Omconfig Chassis Temps Or Omconfig Mainsystem Temps
name=value pair Description
index=<n> Number of the probe or probe index (specify).
warnthresh=default Sets the minimum and maximum warning threshold values to default.
100