Users Guide

Related concepts

Starting And Stopping Patrol Read

To Set The Patrol Read Mode

Select the desired Patrol Read Mode option. The options available are:

• Auto — Initiates the Patrol Read task. After the task is complete, it automatically runs again within a specified period. For example, on

some controllers the Patrol Read runs every four hours and on other controllers, the Patrol Read runs every seven days. The Patrol

Read task runs continuously on the system starting again within the specified period after each iteration of the task completes. If the

system reboots while the Patrol Read task is running in Auto mode, the Patrol Read restarts at zero percent (0%). When the Patrol

Read task is set to Auto mode, you cannot start or stop the task. Auto mode is the default setting.

NOTE: For more information on how often the Patrol Read task runs when in Auto mode, see your controller

documentation.

• Manual — Enables you to start and stop the Patrol Read task using Start and Stop Patrol Read. Setting the mode to Manual does

not initiate the Patrol Read task. If the system reboots while Patrol Read is running in Manual mode, Patrol Read does not restart.

• Disabled — Prevents the Patrol Read task from running on the system.

To Locate Set Patrol Read Mode In Storage Management

1. In the Server Administrator window, under the system tree, expand Storage to display the controller objects.

2. Select a controller object.

3. Click Information/Configuration on the controller Properties page.

4. Select Set Patrol Read mode from the Available Tasks drop-down menu.

5. Click Execute.

You can also locate this task from the Change Controller Properties drop-down menu.

Related concepts

Changing The Controller Properties

Starting And Stopping Patrol Read

Does my controller support this feature? See Supported Features.

NOTE: The Patrol Read operation is not supported on solid-state drives (SSD).

NOTE: This task is not supported on PERC hardware controllers running in HBA mode.

When the Set Patrol Read mode is set to Manual, you can start the Patrol Read task or stop the task when it is running.

There are certain conditions under which the Patrol Read task cannot be run.

To start or stop the Patrol Read Task:

Click Start Patrol Read or Stop Patrol Read.

NOTE:

On PERC 9 family of hardware controllers, the Stop Patrol Read task displays: Patrol Read Aborted. On

controllers before PERC 9, the Stop Patrol Read task displays: Patrol Read Stopped.

To exit without starting or stopping the Patrol Read, click Go Back to Previous Page.

Related concepts

Setting The Patrol Read Mode

Locate Start Stop Patrol Read In Storage Management

1. In the Server Administrator window, under the system tree, expand Storage to display the controller objects.

2. Select a controller object.

3. Click Information/Configuration on the controller Properties page.

Controllers