Users Guide

Enclosure Support On The PERC S100, PERC S110, PERC
S130, And S300 Controllers
Table 67. Enclosure Support on the PERC S100, PERC S110, PERC S130, and S300 Controllers
Enclosure Support PERC S100 PERC S110 PERC S130 PERC S300
Can an enclosure be
attached to this
controller?
No No No No
Supported Features On The Non-RAID Controllers
This section identifies the controller-supported features and whether an enclosure can be attached to the controller.
• Controller Tasks
• Battery Tasks
• Connector Tasks
• Physical Disk Tasks
• Virtual Disk Tasks
• Enclosure Support
For enclosure supported tasks, see Enclosure And Backplane Features.
Controller Tasks Supported On The Non-RAID Controllers
Table 68. Controller Tasks Supported on the Non-RAID Controllers
Controller Task Name Non-RAID SCSI Non-RAID SAS
Enable Alarm No No
Disable Alarm No No
Quiet Alarm No No
Test Alarm No No
Reset configuration No No
Set Rebuild Rate No No
Set Background Initialization Rate No No
Set Check Consistency Rate No No
Set Reconstruct Rate No No
Rescan Controller No No
Create Virtual Disk No No
Export Log File No No
Clear Foreign Configuration No No
Import Foreign Configuration No No
Import/Recover Foreign
Configuration
No No
Set Patrol Read Mode No No
Start Patrol Read No No
Stop Patrol Read No No
Supported Features 187