Users Guide

Alerts 2146 Through 2150 Received During A Rebuild Or
While A Virtual Disk Is Degraded
Perform the following steps:
1. Replace the damaged physical disk.
2. Create a new virtual disk and allow the virtual disk to completely resynchronize.
While the resynchronization is in progress, the status of the virtual disk is Resynching.
3. Restore data to the virtual disk from the backup.
Alerts 2146 Through 2150 Received While Performing I/O,
Consistency Check, Format, Or Other Operation
If you receive alerts 2146 through 2150 while performing an operation other than a rebuild, replace the damaged disk immediately to avoid
data loss.
Perform the following steps:
1. Back up the degraded virtual disk to a fresh (unused) tape drive.
2. Replace the damaged disk.
3. Perform a rebuild.
Read And Write Operations Experience Problems
If the system hangs, times out, or experiences other problems with read and write operations, then there may be a problem with the
controller cables or a device.
Related concepts
Cables Attached Correctly
Isolate Hardware Problems
A Task Menu Option Is Not Displayed
You may notice that the task menus do not always display the same task options. Some tasks are only valid for certain types of objects or
at certain times. For example, a Check Consistency task can only be performed on a redundant virtual disk. Similarly, if a disk is already
offline, the Offline task option is not displayed.
There may be other reasons why a task cannot be run at a certain time. For example, there may already be a task running on the object
that must complete before additional tasks can be run.
A Corrupt Disk Or Drive Message Suggests Running
Autocheck During A Reboot
You can ignore the message and perform autocheck. The reboot completes after autocheck is completed. Depending on the size of your
system, it may take about 10 minutes.
Erroneous Status And Error Messages After A Windows
Hibernation
Activating the Windows hibernation feature may cause Storage Management to display erroneous status information and error messages.
This problem resolves when the Windows operating system recovers from hibernation.
156
Troubleshooting