Users Guide

The Resume Check Consistency task resumes a check consistency after it has been paused.
Blinking And Unblinking A Virtual Disk
Does my controller support this feature? See Supported Features.
The Blink and Unblink tasks blink or unblink the lights on the physical disks included in the virtual disk.
Renaming A Virtual Disk
Does my controller support this feature? See Supported Features.
The Rename task enables you to change name of the virtual disk.
Related concepts
Renaming A Virtual Disk
Canceling A Rebuild
Does my controller support this feature? See Supported Features.
Select the Cancel Rebuild task to cancel a rebuild that is in progress. If you cancel a rebuild, the virtual disk remains in a Degraded state.
The failure of an additional physical disk can cause the virtual disk to fail and may result in data loss. It is recommended that you rebuild the
failed physical disk as soon as possible.
NOTE:
If you cancel the rebuild of a physical disk that is assigned as a hot spare, reinitiate the rebuild on the same
physical disk in order to restore the data. Canceling the rebuild of a physical disk and then assigning another physical
disk as a hot spare does not cause the newly assigned hot spare to rebuild the data. Reinitiate the rebuild on the
physical disk that was the original hot spare.
Changing The Virtual Disk Policy
Does my controller support this feature? See Supported Features.
The Change Policy task enables you to change the read, write, or cache policy of a virtual disk. Changes to the read, write, and cache
policy only apply to the virtual disk that you have selected. This task does not change the policy for all virtual disks on the controller.
Related concepts
RAID Controller Read, Write, Cache, And Disk Cache Policy
Replacing A Member Disk
Does my controller support this feature? See Supported Features.
The Replace Member Disk task allows you to copy data from a physical disk, which is a member of a virtual disk, to another physical disk
by providing the Replace Member Configuration option. You can initiate multiple copies of data from different array groups.
Related tasks
Virtual Disk Task: Replace Member Disk (Step 1 of 2)
Virtual Disk Task: Replace Member Disk (Step 2 of 2)
Clearing Virtual Disk Bad Blocks
Does my controller support this feature? See Supported Features.
The Clear Virtual Disk Bad Blocks task enables you to clear bad blocks on your virtual disk. This feature is applicable only to PERC
H700, H710 Adapter, PERC H710 Mini Blades, PERC H710 Mini Monolithic, PERC H710P Adapter, PERC H710P Mini Blades, PERC H710P
Mini Monolithic, PERC H800, PERC H810 Adapter, PERC H330 Adapter, PERC H330 Mini Monolithic, PERC H330 Mini Blades, PERC
126
Virtual Disks