Connectivity Guide

Possible Data Values Meaning of Data Value
none(0)
The LEDs do not have any chassis identification capabilities.
unknownCapabilities(
1)
The chassis identification control’s capabilities are unknown.
enableCapable(2)
The chassis identification controls can be disabled (offline, a
binary 0 value) or enabled (online, a binary 1 value).
notReadyCapable(4)
The chassis identification control’s capabilities are not
ready.
identifyCapable(8)
The chassis identification control’s LEDs can be made to
identify the chassis.
resetAndEnable(10)
The hard-drive fault LEDs have been reset and enabled.
NOTE: Chassis identification capabilities allow system administrators to set front panel light-emitting diodes (LEDs) to
blink when the chassis has malfunctioning components. When enabled, the blinking lights help administrators locate the
problem chassis.
Table 229. Chassis Identification Control Settings
Variable Name : DellChassisIdentifyControlSettings
Data Type: Integer
Possible Data Values Meaning of Data Value
unknown(1)
The chassis identification control’s state is unknown..
enabled(2)
The chassis identification control’s state is disabled (offline,
a binary 0 value) or enabled (online, a binary 1 value).
notReady(4)
The chassis identification control’s state is not ready.
identifyChassis(8)
The chassis identification control’s LEDs may be returned to
(normal) 0, or (identify chassis) 1.
identifyChassisAndEn
able (10)
The chassis identification control’s LEDs may be returned to
normal (a binary 0 value), or identify chassis and enabled (a
binary 1 value).
Table 230. Host Control Capabilities
Variable Name : DellHostControlCapabilities
NOTE: An operator can manually enable these actions using SNMP.
Data Type: Integer
Possible Data Values Meaning of Data Value
manualRebootCapable(
1)
The operator can reboot capable host.
manualPowerOFFCapabl
e(2)
The operator can power off capable host.
manualPowerCycleCapa
ble(4)
The operator can power-cycle capable host.
manualAllExceptOpera
ting
SystemShutdownCapabl
e(7)
The operator can reboot and power off capable host.
manualOperatingSyste
mShut downCapable(8)
The operator can shut down the operating-system–
shutdown capable host.
Server Administrator Group 59