Release Notes

• DF330800: Server Administrator Web server local user login fails on the Windows 2008 R2
Managed Node. When a Windows 2008 R2 Managed Node is added to a domain, logging in from
any Server Administrator Web Server to that Windows 2008 R2 Managed Node will fail with local
user or local power-user credentials. Only the credentials of a local Administrator or Domain user
will work, with a prerequisite that all required winrm configurations have been applied.
Limitations of Server Administrator on Microsoft Windows 2012 Operating Systems
• BITS068231: On Windows Server 2012 with Server Administrator (32-bit), “Base Memory Address”
and IRQ values are not available for any Network Interface Cards.
Limitations of Server Administrator on All Supported Operating Systems
• BITS107804: On PowerEdge R210 II and T110 II servers, clearing the ‘Shutdown OS First’ checkbox
and performing a reboot using the ‘Reboot’ option does not reboot the servers. After performing
these steps if you refresh the Page, the options on the Remote Shutdown page are not displayed.
• On Dell PowerEdge T110 II systems, the following Server Administrator bios settings are not
consistent with the F2 BIOS setup settings:
o Watchdog timer: Server Administrator displays the option as disabled, but F2 BIOS allows to
change the setting.
o Embedded Video Controller: Server Administrator provides options to enable or disable, but
in F2 BIOS the option is grayed out.
o TPM Security: Server Administrator does not allow to change the settings, but F2 BIOS
allows to change the settings.
o System Profile State: Server Administrator does not allow to make changes, but F2 BIOS
allows to make the changes.
o Memory Testing: Server Administrator does not support this feature, but F2 BIOS supports
this feature.
o SRIOV option: Server Administrator does not display this information, but F2 BIOS displays
this feature.
• Due to non-availability of resources, inventory collector may terminate unexpectedly and restart. If
this occurs, the folder "C:\Temp\invcol" may be left as an artifact. The presence of this folder does
not affect the functionality of the inventory collection. The folder can be deleted if required.
• After installing Server Administrator from the command prompt, typing an "omreport" or mconfig"
command from the same prompt can cause an error. Open a new command prompt window and
type commands.
• If the command log page in the Server Administrator GUI displays an error message indicating that
the XML is malformed, you must clear the command log from the CLI using the "omconfig system
cmdlog action=clear" command
• After a "Reset to Defaults" operation of the Integrated Remote Access Controller, the first user
configuration, operation fails if it is a single-user configuration item (such as enabling or disabling a
user or changing user name). Always change a combination of two-user configuration items (such
as enabling or disabling a user and changing user name) concurrently during your first
configuration operation.
• While typing the command "omreport system version -outc <filename>",ensure that you specify an
absolute path name for the output file; else, the output file is empty. For example, c:\out.txt.
• Typing "omreport system esmlog/alertlog/cmdlog -fmt tbl" command on the CLI can result in XML
parsing errors if the size of the log is very large. Use the GUI or the "omreport system
esmlog/alertlog/cmdlog" CLI command to view the contents of the log.