Deployment Guide

Return Code Description
2 A warning condition, or conditions, is associated
with the software. It is recommended that you
resolve the conditions causing the warning before
proceeding with the installation of the software. To
continue, select and install the software using the
custom installation.
3 An error condition, or conditions, is associated
with the software. Resolve the conditions causing
the error before proceeding with the installation of
the software. If you do not resolve the issues, the
software is not installed.
—1 A Microsoft Windows Script Host (WSH) error. The
prerequisite checker does not run.
—2 The operating system is not supported. The
prerequisite checker does not run.
—3 The user does not have Administrator privileges.
The prerequisite checker does not run.
—4 Not an implemented return code.
—5 The prerequisite checker does not run. The user
failed to change the working directory to %TEMP
%.
—6 The destination directory does not exist. The
prerequisite checker does not run.
—7 An internal error has occurred. The prerequisite
checker does not run.
—8 The software is already running. The prerequisite
checker does not run.
—9 The WSH is corrupted, is a wrong version, or is not
installed. The prerequisite checker does not run.
—10 An error has occurred with the scripting
environment. The prerequisite checker does not
run.
NOTE: A negative return code (-1 through -10) indicates a failure in running the prerequisite
checker tool. Probable causes for negative return codes include software policy restrictions, script
restrictions, lack of folder permissions, and size constraints.
NOTE: If you encounter a return code of 2 or 3, it is recommended that you inspect the
omprereq.htm file in the windows temporary folder %TEMP%. To find %TEMP%, run echo %TEMP%.
Common causes for a return value of 2 from the prerequisite checker:
• One of the storage controllers or drivers has outdated firmware or driver. See
firmwaredriverversions_<lang>.html (where < lang > stands for language) or
firmwaredriverversions.txt found in the %TEMP% folder. To find %TEMP%, run echo %TEMP%.
• RAC component software version 4 is not selected for a default install unless the device is detected
on the system. The prerequisite checker generates a warning message in this case.
• Intel and Broadcom agents are selected for a default install only if the corresponding devices are
detected on the system. If the corresponding devices are not found, prerequisite checker generates a
warning message.
12