Deployment Guide

Table 7. Meta RPMs

Meta RPMs Details

srvadmin-all Installs all the components.

srvadmin-base Installs the Server Instrumentation component.

This component has to be installed before

installing any of the other specific components.

srvadmin-idrac Installs the iDRAC component.

srvadmin-rac4 Installs the DRAC 4 component.

srvadmin-rac5 Installs the DRAC 5 component.

srvadmin-standardAgent Installs the Remote Enablement component.

srvadmin-storageservices Installs the storage services component.

srvadmin-webserver Installs the web server component.

srvadmin-server-snmp Installs the server Simple Network Management

Protocol (SNMP) component.

srvadmin-server-cli Installs the server Command Line Interface (CLI)

component.

srvadmin-storageservices-snmp Installs the storage SNMP component.

srvadmin-storageservices-cli Installs the storage CLI component.

Related Links:

Linux Installer Packages

Custom RPMs Based Installation

The following is an example of custom RPMs-based installation of Server Administrator, including the

installation of the Remote Enablement feature and the Storage Management Service components.

NOTE: On the Red Hat Enterprise Linux 5.x operating system, DVDs are automounted with the -

noexec mount option. This option does not allow you to run any executable from the DVD. You

have to manually mount the DVD and then run executables.

1. Log in as root to the system running the supported operating system where you want to install the

managed system components.

2. Insert the Systems Management Tools and Documentation DVD into the DVD drive.

3. Navigate to the operating system specific directory corresponding to the system.

4. Type the following command:

rpm –ivh Server-Instrumentation/<arch>/*.rpm

add-StorageManagement/<arch>/*.rpm

RemoteEnablement/<arch>/*.rpm

Server Administrator services do not start automatically.

NOTE: Ensure that you install Server Instrumentation or Remote Enablement before installing

Remote Access Controller or Storage Management.

NOTE: If you choose to install the Remote Enablement feature, ensure that you install the

dependent RPMs before installing this feature.