Users Guide

NOTE: On Linux systems, user or user groups upgraded to administrator or administrator groups

cannot view the boot order sequence.

BIOS setup groups

The following table lists the available groups of the BIOS setup parameters on PowerEdge systems.

NOTE: Based on the hardware configuration, the attributes may vary in a specific group.

Table 5. BIOS Setup Groups

Group Description

BIOS Option Settings Controls the BIOS start settings when bootmode is set to bios.

Boot Settings Controls the system boot settings when bootmode is set to bios.

Integrated Devices Controls the devices integrated on the system board.

Memory Settings Controls the system memory settings.

Miscellaneous Settings Controls some miscellaneous system settings.

Network Settings Controls the network settings of the system.

One-Time Boot

NOTE: This group is not

supported on 13G

systems.

Supports one-time boot to a specified device.

Processor Settings Controls the processor settings of the system.

SATA Settings Control the embedded SATA ports settings.

Serial Communication Controls the Serial Communication options.

Slot Disablement Controls the system slots that are present on the system.

System Information Displays the information that uniquely identifies the system.

System Profile Settings Controls the power management settings.

System Security Controls the security features of the system.

UEFI Boot Settings Controls the system boot settings when boot mode is set to uefi.

Omreport Chassis Currents Or Omreport Mainsystem Currents

This command is no longer available through Server Administrator.

Omreport chassis fans or omreport mainsystem fans

Use the omreport chassis fans or omreport mainsystem fans command to view the fan probe status and

settings. Type:

omreport chassis fans index=n

omreport mainsystem fans index=n