Users Guide
– New CLI commands for configuring and displaying the logging preferences. For more details see,
Omconfig Preferences Logging and Omreport Preferences Logging.
– New CLI commands for configuring and displaying the Ciphers, SSL Protocol, Port, IPAddress and
Session time-out in preferences webserver. For more details see, Omconfig preferences
webserver and Omreport preferences webserver.
• Added support for the following features in Storage Management:
– Support to configure physical disks into Redundant Array of Independent Disks (RAID) 0 virtual
disks . For more information see, Omconfig controller commands.
– Support for setting the Remaining Rated Write Endurance Threshold for PCIe SSDs, SAS SSDs, and
SATA SSDs. For more information see, Omconfig Global Commands.
• Added support for the following operating system:
– Red Hat Enterprise Linux 7.1 and 6.7
– SUSE Linux Enterprise Server 11 SP4
– VMware vSphere 5.5 U3
• Added support for the following browsers:
– Google Chrome 42
– Safari 7.1 and 8.0
– Mozilla Firefox 37
• Added support for the following Dell PowerEdge servers:
– R230
– R330
– T130
– T330
• Added support for the following adapter cards:
– Emulex LightPulse LPe15000B-M8-D 1-Port 8G Gen 5 Fibre Channel Adapter
– Emulex LightPulse LPe15002B-M8-D 2-Port 8G Gen 5 Fibre Channel Adapter
– Emulex LightPulse LPm15002B-D 2-Port 8G Gen 5 Fibre Channel Adapter
– Emulex OneConnect OCe14102B-U1-D 2-port PCIe 10GbE CNA
– Emulex OneConnect OCm14104B-U1-D 4-port 10GbE rNDC CNA
– Emulex OneConnect OCm14102B-U4-D 2-port 10GbE bNDC CNA
– Emulex OneConnect OCm14102B-U5-D 2-port 10GbE Mezz CNA
– Emulex OneConnect OCe14102B-N1-D 2-port PCIe 10GbE NIC
– Emulex OneConnect OCm14104B-N1-D 4-port 10GbE rNDC NIC
– Emulex OneConnect OCm14102B-N5-D 2-port 10GbE Mezz NIC
– Emulex OneConnect OCm14102B-N6-D 2-port 10GbE bNDC NIC
– Mellanox ConnectX-3 Pro Dual Port 10 GbE SFP+ PCIE Adapter
– Mellanox ConnectX-3 Pro Dual Port 40 GbE QSFP+ Adapter
– Mellanox ConnectX-3 Pro Dual Port 10 GbE KR Mezzanine Adapter
NOTE: For the list of supported operating systems and Dell servers, see the Dell Systems Software
Support Matrix in the required version of OpenManage Software at dell.com/openmanagemanuals.
NOTE: CLI commands are not supported on systems running the VMware ESXi operating system.
11