Manualshelf

Users Guide

ManualsBrandsDell ManualsActive System ManagerOpenManage Server Administrator Version 8.2
71727374757677787980
Property Definition
• HDD — Hard Disk Drive. An HDD is a non-volatile storage device which
stores digitally-encoded data on rapidly rotating platters with magnetic
surfaces.
• SSD — Solid-State Drive. An SSD is a data storage device that uses
solid-state memory to store persistent data.
• Unknown — Storage Management is unable to determine the media
type of the physical disk.
Used RAID Disk Space Displays the amount of the physical disk space that is used by the virtual
disks on the controller. This property is not applicable for physical disks
attached to non-RAID controllers.
In certain circumstances, the Used RAID Disk Space displays a value of
zero (0) even though a portion of the physical disk is actually being used.
This occurs when the used space is 0.005GB or less. The algorithm for
calculating the used disk space rounds off a figure of 0.005GB or less than
zero. Used disk space that is between 0.006GB and 0.009GB is rounded
off to 0.01GB.
Available RAID Disk Space Displays the amount of available space on the disk. This property is not
applicable for physical disks attached to non-RAID controllers.
Hot Spare Indicates whether the disk has been assigned as a hot spare. This property
is not applicable for physical disks attached to non-RAID controllers.
Vendor ID Displays the hardware vendor of the disk.
Product ID Displays the product ID of the device.
Firmware Revision Displays the firmware version of the physical device.
Serial No. Displays the serial number of the disk.
PCIe Negotiated Link
Speed
Displays the current negotiated transfer speed of the physical device in
GT/s.
PCIe Maximum Link
Speed
Displays the capable transfer speed of the physical device in GT/s.
Manufacture Day Displays the day of the month on which the physical disk was
manufactured.
Manufacture Week Displays the week of the year during which the physical disk was
manufactured.
Manufacture Year Displays the year in which the physical disk was manufactured.
SAS Address Displays the SAS address of the physical disk. The SAS address is unique to
each SAS disk.
After Import Status Displays the status of the physical disk after importing the foreign
configuration. Possible values are:
• Foreign
• Online
• Offline
• Replaced
77