Users Guide

Properties Description
Media Displays the media type of the device.
Driver Version Displays the version of the driver that is installed
on the PCIe SSD subsystem.
NOTE: Storage Management displays Not
Applicable for subsystem for which the driver
version cannot be obtained.
Remaining Rated Write Endurance
Displays information on the SSD renewal/
replacement based on the amount of write
workloads. This field indicates the total remaining
programs or erase-cycles available on the SSD,
based on the cumulative specification of the total
NAND (Negated AND or NOT AND) Flash chips in
the SSD.
NOTE: This option is applicable to Micron
PCIe SSDs, Non-Volatile Memory Express
(NVMe) PCIe SSDs, and SAS/SATA SSDs.
Firmware Revision Displays the firmware version of the device.
Model Number Displays the Piece Part Identification (PPID) of the
PCIe SSD.
Capacity Displays the capacity of the device.
Vendor ID Displays the hardware vendor of the device.
Product ID Displays the product ID of the device.
Serial No. Displays the serial number of the device.
PCIe Negotiated Link Speed Displays the current negotiated transfer speed of
the device in GT/s.
PCIe Maximum Link Speed Displays the capable transfer speed of the device
in GT/s.
PCIe Negotiated Link Width Displays the current negotiated link width of the
device.
PCIe Maximum Link Width Displays the capable link width of the device.
Form Factor Displays the form factor of the device. Possible
values are:
Add-in Card — For HHHL devices
2.5 inches — For physical devices other than a
HHHL device.
Sub Vendor Displays the vendor name of the device.
PCIe SSD In Slot Card Tasks
You can perform the following tasks on the PCIe SSD in slot card:
48