Users Guide

Properties Description

SSD subsystems attached to the system starting

with zero. This number is the same as the PCIe

SSD subsystem ID number reported by the

omreportcommand. For information on

Command Line Interface, see the Server

Administrator Command Line Interface User's

Guide.

NOTE: In CLI commands, the PCIe SSD

subsystem ID is displayed as the controller ID.

Status These icons represent the severity or health of the

PCIe SSD Subsystem.

— Normal/OK

— Warning/Non-critical

— Critical/Failure/Error

Name Displays the name of the subsystem.

Slot ID

Displays the slot to which the PCIe SSD subsystem

is attached.

NOTE: If Not Applicable is displayed, you can

identify the Slot ID by selecting the System →

Main → Systems Chassis → Slots object in the

tree view and clicking the Information tab.

The Slot ID property on this tab may display

the correct information.

State Displays the status of the subsystem. Possible

values are:

• Ready — The subsystem is functioning

normally.

• Degraded — The subsystem has encountered a

failure and is operating in a degraded state.

• Failed — The subsystem has encountered a

failure and is no longer functioning.

Number of Extender Cards Displays the number of extender cards in the

subsystem. Each extender card can be attached to

physical disks or an enclosure. The extender card

must be a PCIe SSD port.

Available Reports Allows you to view the Slot Occupancy report. For

more information, see Available Reports.