Users Guide

NOTE: You must also enable the Revertible Hot Spare option to use Replace Member Disk task.

The destination physical disk should be in the Ready state, available to be written to, and of the

appropriate size and type.

NOTE: The destination physical disk can also be an available hot spare.

Related Concepts

Replacing A Member Disk

Replacing A Member Disk: (Step 1 of 2)

1. Select the physical disk in the Connector table that you want to replace.

2. Select the destination disk in the Disks available for replace member operation table.

CAUTION: If you choose a hot spare as the destination physical disk, your virtual disk does

not have a hot spare, unless you assign one.

NOTE: You can select only one source or destination physical disk at a time.

3. Click Apply Changes.

To exit without replacing the member disk, click Go Back To Virtual Disk Page.

You can view the progress of the Replace Member Disk task on the Physical Disk Details page.

NOTE: For PERC H310, H330, H700, H710, H710P, H800, H810, H730, H730P, H830, and

FD33xD/FD33xS controllers, if any of the drives you selected is in the spun down state, the

following message is displayed: The below listed physical drive(s) are in the

spun down state. Executing this task on these drive(s) takes additional

time, because the drive(s) need to spun up. The message displays the ID(s) of the

spun down drive(s).

Related Concepts

Physical Disk Or Physical Device Properties

Physical Disk Or Physical Device Tasks

To Locate Replace Member Disk In Storage Management

1. In the Server Administrator window, under the system tree, expand Storage to display the controller

objects.

2. Expand a controller object.

3. Select the Virtual Disks object.

4. Select Replace Member Disk from the Available Tasks drop-down menu.

5. Click Execute.

Virtual Disk Task: Replace Member Disk (Step 2 of 2)

This page displays the summary of the attributes of the virtual disk in which you replaced the member

disk. Use this page to review your changes before completing the virtual disk replace member task.

173