Users Guide

• Backup operation completes without error. This indicates that there are no bad blocks on the
written portion of your virtual disk.
If you still receive bad block warnings, the bad blocks are in a non-data area. Proceed to step 2.
2. Run Patrol Read and check the system event log to ensure that no new bad blocks are found.
If bad blocks still exist, proceed to step 3. If not, the condition is cleared without the need for step 3.
3. To clear these bad blocks, execute the Clear Virtual Disk Bad Blocks task.
This Clear Virtual Disk Bad Block feature is applicable to PERC H310 Adapter, PERC H310 Mini
Monolithic, PERC H310 Mini Blades, PERC H700, PERC H710 Adapter, PERC H710 Mini Blades, PERC
H710 Mini Monolithic, PERC H710P Adapter, PERC H710P Mini Blades, PERC H710P Mini Monolithic,
PERC H800, PERC H810 Adapter, PERC H330 Adapter, PERC H330 Mini Monolithic, PERC H330 Mini
Blades, PERC H330 Embedded, PERC H730 Adapter, PERC H730 Mini Monolithic, PERC H730 Mini
Blades, PERC H730P Adapter, PERC H730P Mini Monolithic, PERC H730P Mini Blades, PERC H730P
Slim, PERC H830 Adapter, and PERC FD33xD/FD33xS.
Virtual Disk Properties And Tasks
Use the virtual disk properties and tasks window to view information about the virtual disks and execute
virtual disk tasks.
From the Options menu:
Refresh Partitions: Click to refresh the Virtual Disk Partitions data once the partition is created using the
operating system commands for the available virtual disks.
Go to the Create Virtual Disk Wizard: Launches the Create Virtual Disk Wizard.
Related Concepts
Virtual Disk Properties
Virtual Disk Tasks
Virtual Disk — Available Tasks
Virtual Disk Properties
The virtual disk properties can vary depending on the model of the controller. Virtual disk properties may
include:
Table 30. Virtual Disk Properties
Property Definition
Status These icons represent the severity or health of the storage
component.
— Normal/OK
— Warning/Non-critical
— Critical/Failure/Error
149