Users Guide

Property Definition
For more information, see Storage Component
Severity.
NOTE: On some enclosures, Storage
Management may experience a short delay
before displaying the current enclosure
temperature and temperature probe status.
For more information, see
Storage
Management May Delay Before Updating
Temperature Probe Status.
Name Displays the name of the temperature probe.
State Displays the status of the temperature probe.
• Ready—The temperature probe is functioning
normally.
• Degraded—The temperature probe has
encountered a failure and is operating in a
degraded state.
• Failed—The temperature probe has
encountered a failure and is no longer
functioning. Storage Management is unable to
communicate with the enclosure using SES
commands. The Failed state is displayed when
the enclosure does not respond to a status
query from Storage Management for any
reason. For example, disconnecting the cable
causes a Failed state.
• Minimum Warning Threshold Exceeded—The
temperature of the enclosure has dropped
below the minimum warning threshold.
• Maximum Warning Threshold Exceeded—The
temperature of the enclosure has exceeded
above the maximum warning threshold.
• Missing — The temperature probe is not
present in the enclosure.
• Inactive — The temperature probe is present in
the enclosure, but the EMM that it monitors is
not installed.
Reading
Displays the current temperature of the enclosure
as reported by the temperature probe.
Warning Threshold The Minimum and Maximum properties indicate
the temperatures currently set for the Warning
threshold.
Failure Threshold The Minimum and Maximum properties indicate
the temperatures currently set for the Failure
threshold.
Related Concepts
Enclosure Temperature Probes
Related Tasks
Checking The Temperature Of The Enclosure
105