Users Guide

Property Definition
This property is not displayed for the 22xS enclosures that have E.
17 firmware or later.
Speed
Indicates the fan speed. The values are displayed in rpm. If the fan
is in Offline state, the value for the Speed property is Unknown.
For information on events that cause the fan speed to change, see
the hardware documentation.
Enclosure Power Supplies
The enclosure power supplies are displayed under the Power Supplies object in the tree view. You can
select the Power Supplies object to view the status information.
Power Supply Properties
The following table describes the enclosure’s power supplies properties:
Table 19. Power Supply Properties
Property Definition
Status These icons represent the severity or health of the storage
component.
— Normal/OK
— Warning/Non-critical
— Critical/Failure/Error
For more information, see Storage Component Severity.
Name Displays the name of the power supply.
State Displays the status of the power supply.
• Ready — The power supply is functioning normally.
• Degraded — The power supply has encountered a failure and
is operating in a degraded state.
• Failed — The power supply has encountered a failure and is no
longer functioning. Storage Management is unable to
communicate with the enclosure using SES commands. The
Failed state is displayed when the enclosure does not respond
to a status query from Storage Management for any reason. For
example, This state is displayed when you disconnect the
cable.
• Missing — The power supply is not present in the enclosure.
Part Number Displays the part number of the power supply.
This property is not displayed for the 22xS enclosures that have E.
17 firmware or later.
Firmware Version Displays the firmware version number of the power supply.
103