Users Guide

• Enclosure Temperature Probes
• Enclosure Management Modules (EMMs)
• Enclosure And Backplane Health
• Enclosure And Backplane Properties And Tasks
Enclosure Physical Disks
The physical disks in an enclosure are displayed under the enclosure object in the tree view. Select a disk
in the tree to view the status information.
Enclosure Fans
The fans are a component of the enclosure cooling module. The enclosure fans are displayed under the
Fans object in the tree view. You can select a fan to view the status information.
Fan Properties
Fans are a component of the enclosure’s cooling module. The following table describes the fan
properties:
Table 18. Fan Properties
Property Definition
Status These icons represent the severity or health of the storage
component.
— Normal/OK
— Warning/Non-critical
— Critical/Failure/Error
For more information, see Storage Component Severity.
Name Displays the name of the fan.
State Displays the status of the fan. Possible values are:
• Ready — The fan is functioning normally.
• Degraded — The fan has encountered a failure and is operating
in a degraded state.
• Offline — The fan or power supply has been removed from the
enclosure.
• Failed — The fan has encountered a failure and is no longer
functioning. Storage Management is unable to communicate
with the enclosure using SES commands. The Failed state is
displayed when the enclosure does not respond to a status
query from Storage Management. For example, disconnecting
the cable.
• Missing — The fan is not present in the enclosure.
Part Number
Displays the part number of the fan.
102