Users Guide

Omconfig Rekey LKM Controller
Descriptio
n
Re-keys the encryption key in LKM mode for the controller.
Syntax
omconfig storage controller action=rekeylkm controller=id
keyid=<keyid> passphrase=<passphrase string> escrow=yes
filepath=<Absolute path to the escrow file>, where id is the controller ID as
reported by the omreport storage controller command.
Example
to
Re-key the encryption key for the controller.
Example
omconfig storage controller action=rekeylkm controller=1
Omconfig Convert Multiple RAID To Non-RAID
Description Converts multiple RAID to non-RAID on the given controller.
Syntax
omconfig storage controller action=convertraidtononraid
controller=id pdisk=<PDISKID>, where id is the controller ID as reported
by the omreport storage controller command and PDISKID is specified as
pdisk=connector:enclosureID:targetID | connector:targetID.
Example to Convert multiple non-RAID to RAID on controller 0.
Example
omconfig storage controller action=convertnonraidtoraid
controller=0 pdisk=0:2:3
Omconfig Convert Multiple Non-RAID To RAID
Description Converts multiple non-RAID to RAID on the given controller.
Syntax
omconfig storage controller action=convertnonraidtoraid
controller=id pdisk=<PDISKID>, where id is the controller ID as reported
by the omreport storage controller command and PDISKID is specified as
pdisk=connector:enclosureID:targetID | connector:targetID.
Example to Convert multiple non-RAID to RAID on controller 0,
Example
omconfig storage controller action=convertnonraidtoraid
controller=0 pdisk=0:2:3
Omconfig Enclosure Commands
The following table provides the omconfig command syntax required to execute enclosure tasks.
195