Users Guide

Omconfig set controller mode
Descriptio
n
Sets the mode of the controller to RAID or HBA.
Syntax
omconfig storage controller action=setcontrollermode controller=id
mode=raid|hba, where id is the controller ID as reported by the omreport storage
controller command.
NOTE: If a virtual disk, hotspare, or encryption key is enabled on the controller, the
controller mode cannot be changed to HBA. Reboot the system for the change to take
effect.
Example
to
Set the controller mode to HBA.
Example
omconfig storage controller action=setcontrollermode controller=1
mode=hba
Omconfig Set Patrol Read Mode
Descriptio
n
Sets the patrol read mode for the controller.
Syntax
omconfig storage controller action= setpatrolreadmode controller=id
mode= manual|auto|disable, where id is the controller ID as reported by the
omreport storage controller command.
Example
to
Sets the patrol read on controller 1 to manual mode
Example
omconfig storage controller action= setpatrolreadmode controller=1
mode=manual
Omconfig Start Patrol Read
Descriptio
n
Starts the patrol read task on the controller.
Syntax omconfig storage controller action=startpatrolread controller=id,
where id is the controller ID as reported by the omreport storage controller command.
Example
to
Start the patrol read task on controller 1.
Example
omconfig storage controller action=startpatrolread controller=1
NOTE: To start patrol read, the current patrol read mode is set to Manual.
193