Users Guide

NOTE: In some circumstances, you may receive a warning message if this
command deletes the system or boot partition. You can override this
warning by using the force=yes parameter. In this case, the syntax is as
follows:
omconfig storage vdisk action=slowinit controller=id
vdisk=id force=yes
Example to Slow initialize virtual disk 4 on controller 1.
Example
omconfig storage vdisk action=slowinit controller=1 vdisk=4
Omconfig cancel initialize virtual disk
Description Cancels the initialization of a virtual disk.
Syntax
omconfig storage vdisk action=cancelinitialize controller=id
vdisk=id, where id is the controller ID and virtual disk ID as reported by the
omreport command.
NOTE: To obtain these values, type omreport storage controller to display
the controller IDs and then type omreport storage vdisk controller=ID to
display the IDs for the virtual disks attached to the controller.
Example to Cancels the initialization of virtual disk 4 on controller 1.
Example
omconfig storage vdisk action=cancelinitialize controller=id
vdisk=id
Omconfig cancel background initialize
Description Cancels the background initialization process on a virtual disk.
Syntax
omconfig storage vdisk action=cancelbginitialize
controller=id vdisk=id, where id is the controller ID and virtual disk ID as
reported by the omreport command.
NOTE: To obtain these values, type omreport storage controller to display
the controller IDs and then type omreport storage vdisk controller=ID to
display the IDs for the virtual disks attached to the controller.
Example to Cancel background initialization on virtual disk 4 on controller 1.
Example
omconfig storage vdisk action=cancelbginitialize controller=1
vdisk=4
171