Users Guide

Country Names Codes
URUGUAY UY
UZBEKISTAN UZ
VANUATU VU
VENEZUELA VE
VIET NAM VN
VIRGIN ISLANDS (BRITISH) VG
VIRGIN ISLANDS (U.S.) VI
WALLIS AND FUTUNA ISLANDS WF
WESTERN SAHARA EH
YEMEN YE
YUGOSLAVIA YU
ZAMBIA ZM
ZIMBABWE ZW
Omconfig System Or Omconfig Servermodule
Use the omconfig system or omconfig servermodule commands to clear logs, determine how various
shutdown actions occur, set initial values or edit values for cost of ownership information, and determine
how to respond to a hung operating system.
Omconfig System Alertaction Or Omconfig Servermodule Alertaction
You can use the omconfig system alertaction or omconfig servermodule alertaction command to
determine how Server Administrator responds when a component has a warning or failure event.
Defining alert actions
An alert action is an action that you specify for the system to take when specified conditions are met.
Alert actions determine in advance what actions to take for warning or failure events on intrusion, fans,
temperatures, voltages, power supplies, memory, and redundancy.
For example, if a fan probe on the system reads a fan RPM of 300 and your minimum warning threshold
value for that fan probe is 600 RPM, then the system generates a fan probe warning. Alert action settings
determine how users are notified of this event. You can also configure alert actions for temperature,
voltage, and probe readings that fall within the warning or failure range.
117