Connectivity Guide

iDRAC8 MIB

The Integrated Dell Remote Access Controller (iDRAC) MIB (filename iDRAC-SMIv1.mib/ iDRAC-

SMIv2.mib) is the MIB supported by the Integrated Dell Remote Access Controller 8 (iDRAC8). This MIB

provides management data that allows you to monitor devices and software on a system via an out-of-

band connection to the iDRAC8 of a system.

NOTE: From iDRAC7 firmware release r1.30.30 or later and iDRAC8, the iDRAC7 or iDRAC8 MIB file

is published in both types of SMI (Structure of Managed Information) notations: SMIv1 and SMIv2.

The SMIv1 copy of the iDRAC7 or iDRAC8 MIB file is named iDRAC-SMIv1.mib. And the SMIv2 copy

is named iDRAC-SMIv2.mib. Prior to iDRAC7 firmware release r1.30.30, only a SMIv1 copy was

published. And the file name of the SMIv1 copy was iDRAC-MIB.txt.

Supported Systems

The iDRAC8 MIB is supported on the following systems:

Blade Servers

• PowerEdge M420

• PowerEdge M520

• PowerEdge M620

• PowerEdge M820

• PowerEdge M630

• PowerEdge FM120

• PowerEdge FC630

Rack and Tower Servers

The Rack and Tower servers for this release:

• PowerEdge R730

• PowerEdge R730xd

• PowerEdge R630

• PowerEdge T630

• PR7910

• C4130

iDRAC8 Supported SNMP Versions

The following table identifies the SNMP versions that support iDRAC8 for the given SNMP operations.