Release Notes

Server Administrator Data Manager Service is marked as an interactive service. However,
the system is configured to not allow interactive services. This service may not function
properly." This change allows the DSM Server Administrator Data Manager Service to
execute interactive applications properly for an Alert Action. Also, make sure the
Interactive Services Detection service is running, to see the interface or prompt displayed
by the interactive application. Once these changes are made, the operating system
displays the "Interactive services dialog detection" dialog box to provide access to the
interactive application interface or prompt. After upgrading Windows Server 2003 x64 to
Windows Server 2008 x64 with Server Administrator installed, the application UI does not
display all the expected instrumentation pages. The Server Administrator installation must
be repaired.
Go to Start-> Settings-> Control panel-> Add Remove Programs-> Select "Change" on the
Server Administrator installation and select the "Repair" option to correct the issue.
• DF330800: Server Administrator Web server local user login fails on the Windows 2008 R2
Managed Node. When a Windows 2008 R2 Managed Node is added to a domain, logging
in from any Server Administrator Web Server to that Windows 2008 R2 Managed Node will
fail with local user or local power-user credentials. Only the credentials of a local
Administrator or Domain user will work, with a prerequisite that all required winrm
configurations have been applied.
Issues for Server Administrator running on Microsoft Windows 2012 Operating Systems
• BITS068231: On Windows Server 2012 with Server Administrator (32-bit), “Base Memory
Address” and IRQ values are not available for any Network Interface Cards.
Issues for Server Administrator running on Red Hat Enterprise Linux Operating Systems
• When starting Server Administrator from the Red Hat Enterprise Linux console, kernel log
messages may appear. To avoid these messages, perform the following steps:
1. Edit the "/etc/sysconfig/syslog" file and modify KLOGD_OPTIONS to
KLOGD_OPTIONS="-c 4".
2. Restart "syslog" by executing "/etc/init.d/syslog restart".
• When using the Mozilla browser on Red Hat Enterprise Linux operating systems, the font
and type size on the Server Administrator global navigation bar appear different from the
default font and type size that application uses.
• For systems running a supported Red Hat Enterprise Linux operating system, kernel driver
messages such as "AAC_ChardevOpen" may be displayed in the console at the login
prompt. These messages are displayed in the console when the driver initialization is
delayed by the installation of Server Administrator services and can be ignored.
• BITS110353: On servers installed on FX2 series chassis Server Administrator Home page
does not load on Red Hat Enterprise Linux 6.5 operating system.
• BITS124573 : On Red Hat Enterprise Linux 7, Server Administrator DWS login does not work.
Use direct local login.
Issues for all Operating Systems
• Server Administrator user interface and commands related to "local authentication enable"
are not applicable for RAC firmware 3.20. The Active Directory authentication feature
replaces the "local operating system authentication" feature in this version of firmware.
Due to this change, the following commands return errors:
"racadm localauthenable"
"omconfig rac authentication"
• Due to fluctuations in the watchdog timer, the "Last Crash Screen" may not be captured
when the Automatic System Recovery is set to a value of less than 30 seconds. To ensure
correct functioning of the "Last Crash Screen" feature, set the System Reset Timer to at
least 30 seconds.