Glossary

To Reconfigure A Virtual Disk: Step 1 of 3
1. Select the physical disks that you want to include in the virtual disk. You can expand the capacity of
the virtual disk by adding additional physical disks. On some controllers, you can also remove
physical disks.
The changes you make to the physical disk selection are displayed in the Selected Physical Disks
table.
NOTE: For a controller that has more than one channel, it may be possible to configure a virtual
disk that is channel-redundant.
NOTE: For PERC H310 Adapter, PERC H310 Mini Monolithic, PERC H310 Mini Blades, PERC
H700, PERC H710 Adapter, PERC H710 Mini Blades, PERC H710 Mini Monolithic, PERC H710P
Adapter, PERC H710P Mini Blades, PERC H710P Mini Monolithic, PERC H800, PERC H810
Adapter, PERC H330 Adapter, PERC H330 Mini Monolithic, PERC H330 Mini Blades, PERC H330
Embedded, PERC H730 Adapter, PERC H730 Mini Monolithic, PERC H730 Mini Blades, PERC
H730P Adapter, PERC H730P Mini Monolithic, PERC H730P Mini Blades, and PERC H830
Adapter controllers, if any of the selected physical drives are in the spun down state, the system
displays a message that indicates the IDs of the spun down drives and the delay in executing
tasks on them.
NOTE: For PERC H310 Adapter, PERC H310 Mini Monolithic, PERC H310 Mini Blades, PERC
H700, PERC H710 Adapter, PERC H710 Mini Blades, PERC H710 Mini Monolithic, PERC H710P
Adapter, PERC H710P Mini Blades, PERC H710P Mini Monolithic, PERC H800, PERC H810
Adapter, PERC H330 Adapter, PERC H330 Mini Monolithic, PERC H330 Mini Blades, PERC H330
Embedded, PERC H730 Adapter, PERC H730 Mini Monolithic, PERC H730 Mini Blades, PERC
H730P Adapter, PERC H730P Mini Monolithic, PERC H730P Mini Blades, and PERC H830
Adapter, if the disk group has free space available, you can expand the virtual disk capacity. To
expand virtual disk capacity, click Expand Capacity.
2. Click Continue to go to the next page or Exit Wizard if you want to cancel.
Related Links
Channel Redundancy And Thermal Shutdown
To locate Reconfigure In Storage Management
1. In the Server Administrator window, under the system tree, expand Storage to display the controller
objects.
2. Expand a controller object.
3. Select the Virtual Disks object.
4. Select Reconfigure from the Available Tasks drop-down box.
5. Click Execute.
Virtual Disk Task: Reconfigure (Step 2 of 3)
Does my controller support this feature? See Supported Features.
The virtual disk reconfigure Step 2 page enables you to select the RAID level and size for the reconfigured
virtual disk.
169