Glossary

PERC H800, PERC H810 Adapter, PERC H330 Adapter, PERC H330 Mini Monolithic, PERC H330 Mini
Blades, PERC H330 Embedded, PERC H730 Adapter, PERC H730 Mini Monolithic, PERC H730 Mini
Blades, PERC H730P Adapter, PERC H730P Mini Monolithic, PERC H730P Mini Blades, and PERC
H830 Adapter.
Virtual Disk Properties And Tasks
Use the virtual disk properties and tasks window to view information about the virtual disks and execute
virtual disk tasks.
From the Options menu:
Refresh Partitions: Click to refresh the Virtual Disk Partitions data once the partition is created using the
operating system commands for the available virtual disks.
Go to the Create Virtual Disk Wizard: Launches the Create Virtual Disk Wizard.
Related Links
Virtual Disk Properties
Virtual Disk Tasks
Virtual Disk — Available Tasks
Virtual Disk Properties
The virtual disk properties can vary depending on the model of the controller. Virtual disk properties may
include:
Table 34. Virtual Disk Properties
Property Definition
Status These icons represent the severity or health of the storage
component.
— Normal/OK
— Warning/Non-critical
— Critical/Failure/Error
For more information, see Storage Component Severity.
Name Displays the virtual disk name.
State Displays the status of the virtual disk. Possible values are:
• Ready — The virtual disk is functioning normally.
• Degraded — A physical disk in a redundant virtual disk is not
online.
• Resynching — A consistency check is being performed on the
virtual disk.
Performing a Cancelling A Check Consistency on a virtual disk
while it is in Resynching state causes the virtual disk to be in a
Failed Redundancy state.
154