Dell OpenManage Server Administrator Version 8.0.
Notes, Cautions, and Warnings NOTE: A NOTE indicates important information that helps you make better use of your computer. CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid the problem. WARNING: A WARNING indicates a potential for property damage, personal injury, or death. Copyright © 2014 Dell Inc. All rights reserved. This product is protected by U.S. and international copyright and intellectual property laws.
Contents 1 Introduction........................................................................................................... 6 Server Administrator..............................................................................................................................6 What’s New in This Release.................................................................................................................. 6 Documenting CIM Classes and Their Properties............................................
CIM_WatchDog.................................................................................................................................. 40 CIM_CoolingDevice............................................................................................................................ 41 CIM_Fan...............................................................................................................................................41 CIM_UserDevice......................................................
DELL_BIOSExtensions.........................................................................................................................82 DELL_BIOSSettings............................................................................................................................. 82 DELL_SDCardDevice...........................................................................................................................83 DELL_NetworkPort................................................................
Introduction 1 This reference guide documents the Dell OpenManage Server Administrator Common Information Model (CIM) provider contained in the Management Object File (MOF) dccim32.mof. CIM provides a conceptual model for describing manageable objects in a systems management environment. CIM is a modeling tool rather than a programming language. CIM provides the structure for organizing objects into a model of a managed environment.
The property values being presented could be NULL or empty string on some systems, although in general, some non-empty values can be expected. Key properties (listed below) always carry non-empty values.
Parent Classes Most classes in the dccim32 provider document both a Class Name and a Parent Class property. The parent class is the class from which any given class inherits its core properties. For example, the CIM_Controller class has the CIM_LogicalDevice class as its parent, and has various types of controllers (CIM_ParallelController, CIM_SerialController) as its children.
Property Description Data Type CSCreationClassName Indicates the computer system’s creation class name. string CSName Indicates the computer system’s name. string CurrentReading Indicates the actual current value sint32 indicated by the sensor in amperes. Description Provides a textual description of the object. string LowerThresholdNonCritical If current reading is between lower threshold noncritical and upper threshold noncritical, the current state is normal. See Figure 3‑2.
Property Description • Data Type Stressed indicates that the element is functioning, but needs attention. Examples of Stressed states are overloaded, overheated, and so on. Nonoperational Status Values: • • Non-recover means that a nonrecoverable error has occurred. Error means that an element has encountered an operational condition that is severe as compared to its normal mode of operation. SystemCreationClassName Indicates the system’s creation class name.
Other Documents You May Need Besides this Dell OpenManage Server Administrator CIM Reference Guide, you can find the following documents on the Dell Support website at dell.com/support/manuals: • Dell OpenManage Server Administrator User’s Guide documents the features, installation, and uninstallation of Server Administrator. • Dell OpenManage Server Administrator Installation Guide contains instructions to help you install Dell OpenManage Server Administrator.
CIM_Physical Element 2 CIM_PhysicalElement is a CIM-defined class. The CIM_PhysicalElement class contains the subclasses shown in Figure CIM_PhysicalElement Class Structure CIM_PhysicalElement Subclasses of the CIM_PhysicalElement class listed in Table below define any component of a system that has a distinct physical identity. Physical elements are tangible managed system elements (usually actual hardware items) that have a physical manifestation of some sort.
Model The name by which the physical element is generally known. string SerialNumber A manufacturerallocated number used to identify the physical element. string Tag string Uniquely identifies the physical element and serves as the element’s key. The Tag property can contain information such as asset tag or serial number data.
Table 3. CIM_PhysicalPackage Properties Class Name: CIM_PhysicalPackage Parent Class: CIM_PhysicalElement Property Description Data Type Removable A CIM_PhysicalPackage is removable if it is designed to be taken in and out of the physical container in which it is normally found without impairing the function of the overall package.
Class Name: CIM_PhysicalFrame Parent Class: CIM_PhysicalPackage Property Description Data Type VisibleAlarm Indicates that the equipment includes a visible alarm. Boolean SecurityBreach An enumerated, integer-valued property indicating that a physical breach of the frame is in progress. Values for the SecurityBreach property are: uint16 1 - Other 2 - Unknown 3 - No breach 4 - Breach attempted 5 Breach successful IsLocked Indicates that the frame is currently locked.
9. 10. 11. 12. 13. Space-saving Main system chassis Expansion chassis Subchassis Bus expansion chassis 14. Peripheral chassis 15. Storage chassis 16. Rack-mount chassis DELL_Chassis The DELL_Chassis class explained in Table below defines the identifying and status properties of the chassis. DELL_Chassis inherits from CIM-defined classes, but is populated by Dell properties. Table 6.
Class Name: DELL_Chassis Parent Class: CIM_Chassis Property Description Data Type LogFormat Defines whether the event log data is unicode formatted or binary (raw). Values for the event LogFormat property are: uint16 1 - Formatted (event log only) 2 Unformatted 3 - Events_and_POST_Formatted (both the event log and the power‑on self-test (POST) log are unicode formatted) FanStatus Indicates the global status of fan sensors. string TempStatus Indicates the global status of temperature sensors.
Class Name: DELL_Chassis Parent Class: CIM_Chassis Property Description Data Type MemoryRedStatus Indicates the global status of memory redundancy. string ChassisExpressServiceCode Indicates the chassis express service code. string ChassisNodeID Chassis Node ID string CIM_PhysicalComponent The CIM_PhysicalComponent class listed in Table below represents any low-level or basic component within a package.
FormFactor 0 — Unknown uint16 1 — Other 2 — SIP 3 — DIP 4 — ZIP 5 — SOJ 6 — Proprietary 7 — SIMM 8 — DIMM 9 — TSOP 10 — PGA 11 — RIMM 12 — SODIMM 13 — SRIMM 14 — SMD 15 — SSMP 16 — QFP 17 — TQFP 18 — SOIC 19 — LCC 20 — PLCC 21 — BGA 22 — FPBGA 23 — LGA 24 — FB-DIMM 19
CIM_PhysicalMemory The CIM_PhysicalMemory class listed in PhysicalMemoryProperties is a subclass of CIM_Chip, representing low-level memory devices, such as SIMMs, DIMMs, and so on. Table 9. CIM_PhysicalMemory Properties Class Name: CIM_PhysicalMemory Parent Class: CIM_Chip Property Description Data Type FormFactor See Chip Properties uint16 MemoryType uint16 Indicates the type of physical memory.
15 - CDRAM 16 - 3DRAM 17 - SDRAM 18 - SGRAM 19 - RDRAM 20 - DDR 21 - DDR2 22 - DDR2 FB-DIMM 24 - DDR3 25 - FBD2 TotalWidth Indicates the total width, uint16 in bits, of the physical memory, including check or error correction bits. If there are no error correction bits, the value in this property should match that specified for the DataWidth property. DataWidth Indicates the data width, uint16 in bits, of the physical memory.
SpeedAsString Indicates the accurate string speed of the physical memory, in string format (with units). Capacity Indicates the total capacity of this physical memory, in bytes. uint64 BankLabel A string identifying the physically labeled bank where the memory is located, for example, "Bank 0" or "Bank A." string PositionInRow Specifies the position of uint32 the physical memory in a “row.
Parent Class: CIM_PhysicalElement Property Description Data Type ConnectorPinout A free-form string describing the pin configuration and signal usage of a physical connector. string ConnectorType An array of integers defining the type of physical connector. An array is specified to allow the description of “combinations” of connector information. For example, one array entry could specify RS-232, another DB-25, and a third entry could define the connector as male.
12 - Fibre Channel (Fiber 42 - unused Optical) 72 - ADB 102 - GIO 13 - Fibre Channel SCAII 43 - PCI (40 pins) 73 - AGP 103 - XIO 14 - Fibre Channel SCAII 44 - ISA (20 pins) 74 - VME bus 104 - HIO 15 - Fibre Channel BNC 45 - unused 75 - VME64 105 - NGIO 16 - ATA 3-1/2 inch (40 pins) 46 - VESA 76 - Proprietary 106 - PMC 17 - ATA 2-1/2 inch (44 pins) 47 - unused 77 - Proprietary processor card slot 107 - MTRJ 18 - ATA-2 48 - unused 78 - Proprietary memory 108 - VF-45 card slot 19 - ATA-
Parent Class: CIM_PhysicalConnector Property Description Data Type ConnectorType See Connector Type Values uint16 SupportsHotPlug Indicates whether the slot supports hot-plug adapter cards. Boolean MaxDataWidth Indicates the maximum uint16 bus width in bits of adapter cards that can be inserted into this slot. Values for the MaxDataWidth property are as follows: 0 - Unknown 1 - Other 8 - bits 16 - bits 32 - bits 64 - bits 128 - bits SystemSlotType Indicates the type of system slot.
11- Proprietary memory card slot 12- I/O Riser card slot 13 - NuBus 14- PCI - 66MHz capable 15 - AGP 16 - AGP 2X 17 - AGP 4X 18 - PCI-X 19 - AGP 8X 160 - PC-98/C20 161 - PC-98/C24 162 - PC-98/E 163 - PC-98/Local bus 164 - PC-98/Card 165 - PCI Express 166 - PCI Express x1 167 - PCI Express x2 168 - PCI Express x4 169 - PCI Express x8 170 - PCI Express x16 171 - PCI Express Gen 2 172 - PCI Express Gen 2 x1 173 - PCI Express Gen 2 x2 174 - PCI Express Gen 2 x4 175 - PCI Express Gen 2 x8 176 - PCI Express Gen 2
CIM_LogicalElement 3 CIM_LogicalElement is a CIM-defined class containing the subclasses described in below Figure .
CIM_LogicalElement Table properties lists the following characteristics for members of the CIM_LogicalElement class: • Represent abstractions used to manage and coordinate aspects of a physical environment such as files, processes, systems, system capabilities, and network components in the form of logical devices • Represent devices, where devices are abstractions of hardware entities that may or may not be realized in physical hardware Table 13.
phone number or e-mail address. PrimaryOwnerName Indicates the name of the primary system owner. string Roles An array of strings that string specifies the roles this system plays in the IT environment. For example, for an instance of a network system, the Roles property might contain the string "storage system.
Table 16. DELL_System Properties Class Name: DELL_System Parent Class: CIM_ComputerSystem CIM_LogicalDevice The CIM_LogicalDevice class described below Table models a hardware entity that may be realized in physical hardware. CIM_LogicalDevice includes any characteristics of a logical device that manages its operation or configuration. An example of a logical device is a temperature sensor’s reading of the actual temperature. Table 17.
CIM_FRU The CIM_FRU class described in FRU Properties contains manufacturing information related to the Field Replaceable Units (FRU) of a system such as a system planar or I/O riser card. Table 18. CIM_FRU Properties Class Name: CIM_FRU Parent Class: CIM_LogicalDevice Property Description Data Type FRUInformationState Indicates the state and availability of FRU information. uint 16 FRUDeviceName Indicates the device name of the FRU.
CIM_Sensor The CIM_Sensor class described in Table below contains hardware devices capable of measuring the characteristics of some physical property, for example, the temperature or voltage characteristics of a computer system Table 19. CIM_Sensor Properties Class Name: CIM_Sensor Parent Class: CIM_LogicalDevice Property Description SensorType Indicates the type of the uint16 sensor, for example, voltage or temperature sensor.
6 - Batteries maintain the time and date and save the system’s BIOS configuration when the system is turned off. OtherSensorType Description Indicates the string type of sensor when the SensorType property is set to Other. PossibleStates Enumerates the string outputs of the sensor. For example, a NumericSensor can report states based on threshold readings. string CurrentState Indicates the current state of the sensor. This value is always one of the Possible States.
PossibleValues Enumerates the string outputs that can be reported by the sensor. sint32 CIM_NumericSensor The CIM_NumericSensor class described in NumericSensor Properties returns numeric settings and may also support threshold settings. Figure below shows the relationship among upper and lower critical and upper and lower non-critical threshold values. The normal range falls between upper and lower noncritical thresholds.
Table 21.
CurrentReading See Common Properties sint32 of Classes IsLinear See Common Properties Boolean of Classes LowerThresholdNonCriti See Common Properties sint32 cal of Classes UpperThresholdNonCriti See Common Properties sint32 cal of Classes LowerThresholdCritical See Common Properties sint32 of Classes UpperThresholdCritical See Common Properties sint32 of Classes SupportedThresholds uint16 An array representing the thresholds supported by this sensor.
SettableThresholds An array representing the writable thresholds supported by this sensor. Settable threshold values are: uint16 1LowerThresholdNonCriti cal 2UpperThresholdNonCriti cal CIM_TemperatureSensor The CIM_TemperatureSensor class described in Table below contains sensors that sample ambient temperature and return a value in degrees celsius. Table 22.
CIM_CurrentSensor The CIM_CurrentSensor class described in Properties Table below contains sensors that measure amperage and return a value in amperes and watts. Table 23.
Table 24.
CurrentReading See Common Properties of Classes sint32 IsLinear See Common Properties of Classes Boolean LowerThresholdNonCritical See Common Properties of Classes sint32 UpperThresholdNonCritical See Common Properties of Classes sint32 CIM_WatchDog The CIM_WatchDog class described in Table below represents a timer that is implemented in system hardware. The watchdog feature allows the hardware to monitor the state of the operating system, BIOS, or a software component installed on the system.
Class Name: CIM_WatchDog Parent Class: CIM_LogicalDevice Property Description Data Type TimeoutInterval Indicates the time-out interval used by the watchdog, in microseconds. uint32 TimerResolution Indicates the resolution of the watchdog timer. For example, if this value is 100, then the timer can expire anytime between –100 microseconds and +100 microseconds.
The CIM_Fan class described in below Table contains a set of devices that work to keep the ambient internal temperature of the system at a safe value by circulating air. Table 28. CIM_Fan Properties Class Name: CIM_Fan Parent Class: CIM_CoolingDevice Property Description Data Type VariableSpeed Specifies if the fan supports variable speeds. Boolean DesiredSpeed Indicates the currently requested fan speed, defined in RPM. When the VariableSpeed value is TRUE, the fan supports variable speeds.
CIM_PointingDevice The CIM_PointingDevice class described in Table below includes those devices used to point to regions of a display. Examples of such devices are a mouse or a trackball. Table 30. CIM_PointingDevice Properties Class Name: CIM_PointingDevice Parent Class: CIM_UserDevice Property Description Data Type PointingType Indicates the type of pointing device.
1 - Not applicable 2 - Right-handed operation 3 - Left-handed operation CIM_Keyboard The CIM_Keyboard class described in Table below includes devices that allow users to enter data. Table 31. CIM_Keyboard Properties Class Name: CIM_Keyboard Parent Class: CIM_UserDevice Property Description Data Type NumberOfFunctionKeys Indicates the number of function keys on the keyboard. uint16 Layout A free-form string indicating the format and layout of the keyboard.
CIM_PowerSupply The CIM_PowerSupply class described in Table below contains devices that provide current and voltage for the operation of the system and its components Table 32. CIM_PowerSupply Properties Class Name: CIM_PowerSupply Parent Class: CIM_LogicalDevice Property Description Data Type IsSwitchingSupply Indicates that the power supply is a switching power supply and not a linear power supply.
6 - Neither range 1 nor range 2 TotalOutputPower Represents the total output power of the power supply in milliwatts. A value of 0 denotes that the power output is unknown. uint32 PMCapable Indicates the Power Monitoring capability. Boolean CIM_Controller The CIM_Controller class described in below Table properties , groups miscellaneous control-related devices.
CIM_ParallelController The CIM_ParallelController class described in below contains a set of objects that control parallel devices. Parallel controllers transfer 8 or 16 bits of data at a time to the devices they control, for example, a parallel port controlling a printer. Table 34. CIM_ParallelController Properties Class Name: CIM_ParallelController Parent Class: CIM_Controller Property Description Data Type DMASupport Set to TRUE if the parallel controller supports DMA.
The CIM_SerialController class described in Table below contains controllers that transfer data one bit at a time to the devices they control, for example, a serial port controlling a modem. Table 35. CIM_SerialController Properties Class Name: CIM_SerialController Parent Class: CIM_Controller Property Description MaxBaudRate Indicates the maximum baud rate uint32 in bits per second supported by the serial controller.
CommandRegister uint16 The current contents of the register that provide basic control over the device’s ability to respond to, and/or perform PCI accesses. The data in the capabilities array is gathered from the PCI status register and the PCI capabilities list as defined in the PCI specification.
Table 37. CIM_PCIDevice Properties Class Name: CIM_PCIDevice Parent Class: CIM_PCIController Property Description Data Type BaseAddress Identifies an array of up to six double-word base memory addresses. uint32 SubsystemID Identifies a subsystem identifier code. uint16 SubsystemVendorID Identifies a subsystem vendor ID. ID information is reported from a PCI device via protocol-specific requests.
BaseAddress Identifies an array of doubleword base memory addresses. uint32 BridgeType Indicates the type of bridge. A bridge is PCI to , except for the Host, which is a host-toPCI bridge. Values for the BridgeType property are as follows: 0 - Host uint16 1 - ISA 128 - Other BaseAddress Identifies an array of doubleword base memory addresses.
3 - Daughter board 4 - ZIF socket 5 - Replacement/piggy back 6 - None 7 - LIF socket 8 - Slot 1 9 - Slot 2 10 - 370-pin socket 19 - Socket mPGA604 20 - Socket LGA771 21 - Socket LGA775 22 - Socket S1 23 - Socket AM2 24 - Socket F (1207) 25— Socket LGA1366 MaxClockSpeed Indicates the maximum speed (in uint32 MHz) of this microprocessor. Core count Indicates the number of core processors detected. uint16 CoreEnabledCount Indicates the number of core processors enabled.
Model Indicates the model name of the processor. string ExtendedCharacteristics uint16 Indicates the extended capabilities of the processor. This attribute is a bit field. The following are the definitions of a bit when set to one: Bit 0 — Virtualization Technology (VT) supported Bit 1 — Demand-Based Switching (DBS) supported Bit 2 — eXecute Disable (XD) supported Bit 3 — Hyper Threading (HT) supported ExtendedStates uint16 Indicates the setting of the extended capabilities of the processor.
5 - Other Family Refers to the processor family type.
31 - K6-2+ 32 - Power PC family 33 - Power PC 601 34 - Power PC 603 35 - Power PC 603+ 36 - Power PC 604 37 - Power PC 620 38- Power PC X704 39- Power PC 750 40 - Intel Core Duo processor 41 - Intel Core Duo mobile processor 42 - Intel Core Solo mobile processor 43 - Intel Atom processor 48 - Alpha family 49 - Alpha 21064 50 - Alpha 21066 51 - Alpha 21164 52 - Alpha 21164 53 - Alpha 21164a 54 - Alpha 21264 55 - Alpha 21364 60 - AMD Opteron 4100 Series processor 64 - MIPS family 65 - MIPS R4000 66 - MIPS R42
80 - SPARC family 81 - SuperSPARC 82 - microSPARC II 83 - microSPARC IIep 84 - UltraSPARC 85 - UltraSPARC II 86 - UltraSPARC IIi 87 - UltraSPARC III 88 - UltraSPARC IIIi 96 - 68040 97 - 68xxx family 98 - 68000 99 - 68010 100 - 68020 101 - 68030 112 - Hobbit family 120 - Crusoe 5000 family 121 - Crusoe 3000 family 122 - Efficeon 8000 family 128 - Weitek 130 - Itanium processor 131 - AMD Athlon 64 processor family 132 - AMD Opteron processor family 133 - AMD Sempron processor family 134 - AMD Turion 64 Mobile
137 - AMD Turion 64 X2 Mobile technology 138 - Quad-Core AMD Opteron processor family 139 - Third-Generation AMD Opteron processor family 140 - AMD Phenom FX QuadCore processor family 141 - AMD Phenom X4 QuadCore processor family 142 - AMD Phenom X2 DualCore processor family 143 - AMD Athlon X2 Dual-Core processor family 144 - PA-RISC family 145 - PA-RISC 8500 146 - PA-RISC 8000 147 - PA-RISC 7300LC 148 - PA-RISC 7200 149 - PA-RISC 7100LC 150 - PA-RISC 7100 160 - V30 family 161 - Quad-Core Intel Xeon proces
168 - Dual-Core Intel Xeon processor 7100 Series 169 - Quad-Core Intel Xeon processor 5400 Series 170 - Quad-Core Intel Xeon processor 171- Dual-Core Intel Xeon processor 5200 Series 172- Dual-Core Intel Xeon processor 7200 Series 173 - Quad-Core Intel Xeon processor 7300 Series 174- Quad-Core Intel Xeon processor 7400 Series 175- Multi-Core Intel Xeon processor 7400 Series 176 - Pentium III Xeon 177 - Pentium III Processor with Intel SpeedStep 178- Technology 179 - Pentium 4 180 - Intel Xeon 181- AS400 fam
193 - Intel Core 2 Extreme processor 194- Intel Core 2 Quad processor 195 - Intel Core 2 Extreme mobile processor 196- Intel Core 2 Duo mobile processor 197- Intel Core 2 Solo mobile processor 198 - Intel Core i7 processor 199 - Dual-Core Intel Celeron processor 200 - S/390 and zSeries family 201- ESA/390 G4 202- ESA/390 G5 203- ESA/390 G6 204 - z/Architecture base 206 - CEh 206 Intel Core i3 processor 214 - Multi-Core Intel Xeon processor 215 - Dual-Core Intel Xeon processor 3xxx Series 216 - Quad-Core Int
224 - E0h 224 Multi-Core Intel Xeon processor 3400 Series 230 - Embedded AMD Opteron Quad-Core processor family 231 - AMD Phenom Triple-Core processor family 232 - AMD Turion Ultra DualCore Mobile processor family 233 - AMD Turion Dual-Core Mobile processor family 234 - AMD Turion Dual-Core Mobile processor family 235- AMD Sempron SI processor family 238 - AMD Opteron Six-Core processor family 250 - i860 251 - i960 260 - SH-3 261 - SH-4 280 - ARM 281 - StrongARM 300 - 6x86 301 - MediaGX 302 - MII 320 - WinC
The CIM_StorageExtent identified in Table below contains devices that manage data storage, for example, hard drives or microprocessor memory. Table 40. CIM_StorageExtent Properties Class Name: CIM_StorageExtent Parent Class: CIM_LogicalDevice CIM_Memory The CIM_Memory class identified in Table below describes the capabilities and management of storage extent devices, for example, cache memory or system memory. Table 41.
Level Defines if this is the primary, secondary, or tertiary cache. Values for the Level property are as follows: 1- Other uint16 2- Unknown 3- Primary 4 - Secondary 5- Tertiary 6- Not applicable WritePolicy uint16 Defines if this cache is a writeback or write-through cache or if this information varies with address or is defined individually for each input/output (I/O).
1- Other 2- Unknown 3- Read 4- Read-ahead 5- Read and read-ahead 6- Determination per I/O DELL_SoftwareFeature The DELL_SoftwareFeature described in Table below defines the universal resource locator (URL) of the systems management software and the language in which systems management information displays. Defining these properties enables users to manage a system using an Internet browser.
CIM_BIOSElement The CIM_BIOSElement class listed in BIOSElement Properties describes the BIOS for the system. The BIOS controls the following: • Communications between the microprocessor and peripheral devices, such as the keyboard and the video adapter. • Miscellaneous functions, such as system messages. Table 44. CIM_BIOSElement Properties Class Name: CIM_BIOSElement Parent Class: CIM_SoftwareElement Property Description Data Type Version Provides the product version information.
because typically they are interested in a sub-collection of the software elements required for a particular platform. Table 45. CIM_SoftwareFeature Properties Class Name: CIM_SoftwareFeature Parent Class: CIM_LogicalElement Property Description Data Type IdentifyingNumber Provides product identification such as a serial number of the software string ProductName Identifies the commonly used product name. string Vendor Identifies the name of the product’s supplier.
Table 46. DELL_SoftwareFeature Properties Class Name: DELL_SoftwareFeature Parent Class: CIM_SoftwareFeature Property Description Data Type OmsaURL Defines the URL for Server Administrator. string Language Sets the language for systems management information. string AgentVersion Defines the version information of local CIM agent (same as ISVC version.
Table 48. CIM_IRQ Properties Class Name: CIM_IRQ Parent Class: CIM_SystemResource Property Description Data Type CSCreationClassName See Common Properties of Classes string CSName See Common Properties of Classes string CreationClassName See Common Properties of Classes string IRQNumber Identifies the interrupt request number. uint32 Availability Indicates the availability of the IRQ.
Shareable Indicates if the IRQ can be Boolean shared. A value of TRUE indicates that the IRQ can be shared. Hardware Boolean Indicates if the interrupt is hardware- or software-based. (A value of TRUE indicates that the interrupt is hardware based.) On a personal computer, a hardware IRQ is a physical wire to a programmable interrupt controller (PIC) chip set through which the microprocessor can be notified of time critical events.
EndingAddress Identifies the ending address of memory mapped I/O. uint64 MappedResource uint16 Indicates the type of memory mapped I/O. MappedResource defines if memory or I/O is mapped, and for I/O, if the mapping is to a memory or a port space. Memory mapped I/O values are as follows: 1- Other 2- Mapped memory 3 - I/O mapped to memory space 4- I/O mapped to port space CIM_DMA The CIM_DMA class described in DMA Properties contains DMA information.
Class Name: CIM_DMA Parent Class: CIM_SystemResource Property Description • • • • Data Type 2 - Unknown 3 - Available 4 - In Use/Not Available 5 - In Use and Available/ Shareable CIM_RedundancyGroup The CIM_RedundancyGroup class described in Table properties below is a set of components that provide more instances of a critical component than are required for the system’s operation. The extra components are used in case of critical component failure.
experienced but some reduced amount of redundancy is still available. 4 - Redundancy lost. Redundancy lost - that a sufficient number of failures have occurred so that no redundancy is available and the next failure experienced causes overall failure. CIM_ExtraCapacityGroup The CIM_ExtraCapacityGroup class described in below properties Table applies to systems that have more capability and components than are required for normal operation, for example, systems that have extra fans or power supplies.
The DELL_PSRedundancyGroup described in Table below is a Dell-specific extension of the CIM_ExtraCapacityGroup class. The DELL_PSRedundancyGroup class defines what constitutes power supply redundancy in a system. Table 53. DELL_PSRedundancyGroup Properties Class Name: DELL_PSRedundancyGroup Parent Class: CIM_ExtraCapacityGroup DELL_FanRedundancyGroup The DELL_FanRedundancyGroup described in Table below defines what constitutes fan redundancy in a system. Table 54.
CIM_ServiceAccessPoint The CIM_ServiceAccessPoint class described in Table below represents the ability to utilize or invoke a service. Access points indicate that a service is available to other entities for use. Table 56.
Class Name: CIM_RemoteServiceAccessPoi ntGroup Parent Class: CIM_ServiceAccessPointGrou p Property Description Data Type name, network address, and other similar information. InfoFormat Indicates an enumerated integer describing the format and interpretation of the AccessInfo property. This property can have the following values: 1 - Other 2 - Host Name 3 - IPv4 Address 4 - IPv6 Address 5 - IPX Address 6 - DECnet Address 7 - SNA Address 8 - Autonomous System Number 9 - MPLS Label 10..
DELL_RemoteServiceAccessPort The DELL_RemoteServiceAccessPort class described in Table below is an extended class of the CIM_RemoteServiceAccessPoint class. The DELL_RemoteServiceAccessPort class provides information about Dell implementation-specific attributes Table 58. DELL_RemoteServiceAccessPort Properties Class Name: DELL_RemoteServiceAccessP ort Parent Class: CIM_RemoteServiceAccessPo int Property Description Data Type PortName Displays the name of the service access port.
1- dualWidthHalfHeight 2- singleWidthFullHeight 3- dualWidthFullHeight 4- singleWidthQuarterHeight 5- 1UHalfWidth 6- 1UQuarterWidth 7- 1UFullWidth 255- notApplicable 76
4 Dell-Defined Classes Dell-defined classes are defined and populated by Dell rather than by the Common Information Model (CIM). For information on how the logs are formatted, see DELL_Chassis Properties. The DELL_EsmLog class described in DELL_EsmLog Properties records failure threshold violations collected by Server Administrator’s embedded server management (ESM) capabilities. Table 59.
Parent Class: None DELL_CMApplication NOTE: Dell-updateable components, such as BIOS and firmware, are considered applications. The DELL_CMApplication class described in DELL_CMApplication contains information related to the Dell change management applications. Table 61. DELL_CMApplication Class Name: DELL_CMApplication Parent Class: None Property Description Data Type componentType Defines the application type. string subComponentID Defines an application string.
Parent Class: None Property Description Data Type componentID Defines a component string. string name Indicates the name of the device. string vendorID Defines an ID for vendor string supplying the device. subVendorID Defines an ID for an additional vendor supplying the device. string deviceID Indicates the ID of the device. string subDeviceID Indicates the ID for additional device. string bus Indicates the PCI bus number. string device Indicates the PCI device number.
DELL_CMInventory The DELL_CMInventory class described in DELL _CMInventory Properties contains information related to the Dell Change Management inventory. Table 64. DELL _CMInventory Properties Class Name: DELL_CMInventory Parent Class: None Property Description Data Type local Indicates the locale of the system. string schemaVersion Indicates the inventory string schema implemented by the system. systemID Defines the system ID.
vendor Indicates the vendor of the operating system. string majorVersion Indicates the major version of the operating system. string minorVersion Indicates the minor version of the operating system. string spMajorVersion Indicates the current service pack number for the operating system’s major version. string spMinorVersion Indicates the current service pack number for the operating system’s minor version.
DELL_BIOSExtensions The DELL_BIOSExtensions identified in DELL_BIOSExtensions Properties contains information related to the specific extension of the data attributes on your system. Table 67. DELL_BIOSExtensions Properties Class Name: DELL_BIOSExtensions Parent Class: CIM_ManagedSystemElement Property Description Data Type systemBIOSCharacteristics Indicates the characteristics of BIOS on your system.
DELL_SDCardDevice The DELL_SDCard Devices identified in DELL_SDCardDevice Properties contains information related to the SD card devices. Table 69. DELL_SDCardDevice Properties Class Name: DELL_SDCardDevice Parent Class: CIM_LogicalDevice Property Description Data Type sdType An enumerated storage device type. The values for this property are: uint8 1 - Other 2 - Unknown 3 - Hypervisor SD 4 - Virtual Flash SD sdCertified Indicates the licensing information uint8 of SD media.
Class Name: DELL_SDCardDevice Parent Class: CIM_LogicalDevice 7 - Write Protected DELL_NetworkPort The Dell_Network Port class described in DELL_NetworkPort Properties represents the Dell-specific features of the network adapters. Table 70. DELL_NetworkPort Properties Class Name: DELL_NetworkPort Parent Class: CIM_Network Port Property Description NIC Capabilities NIC Capabilities bitmask indicates uint 32 the capabilities of the NIC.
Bit 3, Value 1 - NIC is FCoE capable. NIC TOE Capability Defines the TOE capability of the uint 32 NIC. Values for the NIC TOE Capability property are: 0 - NIC/driver does not support querying for capability. 1 - NIC/driver supports querying for capability but query returned an error. 2 - NIC/driver supports querying for capability and querying indicates that it is capable. 4 - NIC/driver supports querying for capability and querying indicates that it is not capable.
prevented querying the NIC/ driver. 16 - NIC/driver supports querying for capability but NIC/driver did not respond to query. NOTE: Boolean value is defined if RDMA is enabled (Boolean is RDMAEnable). NIC iSCSI Capability Defines the iSCSI capability of the uint 32 NIC. Values for the NIC iSCSI Capability property are: 0 - NIC/driver does not support querying for capability. 1 - NIC/driver supports querying for capability but query returned an error.
10 - Hardware is initializing 12 - Hardware is closing 13 - Hardware is not ready NParEPEnable Indicates the mode for NParEP. The values for the NParEPEnable are: uint 32 0 - Disabled 1 - Enabled 2 - Unknown BusNumber Indicates the PCI bus number. uint 8 DeviceNumber Indicates the PCI device number. uint 8 FunctionNumber Indicates the PCI function number. uint 8 DriverVersion Indicates the NIC driver version. string IPAddresss Indicates the NIC IP address.
Table 71.
Class Name: DELL_PowerConsumptionWatts Sensor Parent Class: CIM_Numeric Sensor UpperThresholdNonCritical See Common Properties of Classes sint32 LowerThresholdCritical See Common Properties of Classes sint32 UpperThresholdCritical See Common Properties of Classes sint32 DELL_PowerConsumptionData The DELL_PowerConsumptionData identified in DELL_PowerConsumptionData contains information about the total power consumed from a start time and peak values registered during a time period. Table 73.
DCIM_OEM_DataAccessModule The DCIM_OEM_DataAccessModule class is derived from the CIM_ManagedElement class. This class models hardware information in a proprietary format. Class Name: DCIM_OEM_DataAccessModule Parent Class: CIM_ManagedElement Property Description Data Type InstanceID Identifies the instance. string GlobalStatus Represents the global health status sint32 of the system.
DCIM_RegisteredProfile The DCIM_RegisteredProfile class is derived from the CIM_RegisteredProfile class. This class advertises the capabilities of DCIM_OEM_DataAccessModule.
CIM_Dependency 5 The CIM_Dependency class is an association used to establish dependency relationships between two managed system elements. The CIM_Dependency class described in the figure below does not have a parent class because it is a relationship or association between two elements.
Antecedent CIM_Tachometer refers to the tachometer (fan sensor) that measures the RPM of the fan. Dependent CIM_Fanrefers to the fan whose revolutions are measured by the tachometer. CIM_PackageTempSensor The CIM_PackageTempSensor class described in CIM_PackageTempSensor Properties contains temperature sensors that are often installed in a package such as a chassis or a rack to assist in the monitoring of the package in general. This relationship is described by the CIM_PackageTempSensor association.
Parent Class: CIM_Dependency Element Description Antecedent CIM_PackageVoltSensor refers to the voltage sensor for the package. Dependent CIM_PhysicalPackage refers to the physical package whose voltages are being monitored. CIM_PackageCurrentSensor The CIM_PackageCurrentSensor class described in CIM_PackageCurrentSensor Properties contains amperage sensors that are often installed in a package such as a chassis or a rack to assist in the monitoring of the package in general.
Table 78. CIM_PackageFanSensor Properties Class Name:CIM_PackageFanSensor Parent Class: CIM_Dependency Element Description Antecedent CIM_Fan refers to the cooling device for the package. Dependent CIM_PhysicalPackage refers to the physical package whose environment is being monitored. CIM_PackagePowerSupplySensor The CIM_PackagePowerSupplySensor class described in CIM_PackagePowerSupplySensor Properties contains power supplies that provide power to the whole package. Table 79.
Table 80. DELL_PackagePSRedundancy Properties Class Name: DELL_PackagePSRedundancy Parent Class: CIM_Dependency Element Description Antecedent DELL_PSRedundancyGroup refers to power supplies that deliver wattage for the entire package. Dependent CIM_PhysicalPackagerefers to the package to which the wattage is being supplied. DELL_PSRedundancy The DELL_PSRedundancy class described in DELL_PSRedundancy Properties defines what constitutes a power supply redundancy for Dell systems. Table 81.
Table 82. DELL _AssociatedSupplyPCAmps Class Name: DELL_AssociatedSupplyPCAmp s Parent Class: CIM_Dependency Property Description Data Type Antecedent Indicates the PowerSupply instance. uint 16 Dependent Indicates the PowerConsumptionAmpsSensor associated with the CIM_PowerSupply. uint 16 DELL_AssociatedSystemPCWatts The DELL_AssociatedSystemPCWatts class described in DELL_AssociatedSystemPCWatts is aPowerConsumptionWattsSensor associated with a Dell_System which is defined by this class.
Class Name: DELL_AssociatedSupplyPCAmp s Parent Class: CIM_Dependency Dependent Indicates the PowerConsumptionData associated with the Power Supply. uint 16 DELL_PowerProfileData The DELL_PowerProfileData identified in DELL _PowerProfileData contains information related to power profiling and power knob data. Table 85.
