Reference Guide

name=value pair 1
config=
name=value pair 2 Description
config=advsol characcuminterval=number
number: Sets the character accumulate
interval in 5 millisecond intervals.
charsendthreshold=number
number: Sets the number of characters. BMC
automatically sends a serial over LAN data
packet that contains the number of characters
as soon as this number of characters (or
greater) has been accepted from the
baseboard serial controller into the BMC.
enableipmi= true | false
true: Enables IPMI over LAN.
false: Disables IPMI over LAN.
enablenic=true | false
primarynw=dedicated | lom1 |
lom2 | lom3 | lom4
dedicated: Configures dedicated port as
primary network for remote access.
NOTE: This option requires license to
configure primarynw as dedicated. If the
appropriate license is not installed or has
expired, the system displays an error
message. For more information, see Dell
License Manager at dell.com/
openmanagemanuals.
lom 1: Configures lom1 port as the primary
network for remote access.
lom 2: Configures lom2 port as the primary
network for remote access.
lom 3: Configures lom3 port as the primary
network for remote access.
lom 4: Configures lom4 port as the primary
network for remote access.
NOTE: If the primarynw is set to
dedicated, then set failovernw to none.
failovernw=none | lom1 | lom2 |
lom3 | lom4 | all
none: Configures the failover network to none.
lom 1: Configures the failover network to lom
1.
lom 2: Configures the failover network to lom
2.
lom 3: Configures the failover network to lom
3.
lom 4: Configures the failover network to lom
4.
75