Reference Guide

Group name=value pair 1 attribute= name=value pair 2 setting=

attribute=Proc64bit setting=<string>

attribute=ProcAdjCacheLine setting=Enabled | Disabled

attribute=ProcBusSpeed setting=<string>

attribute=ProcCores setting=Single | All | 1 | 2 | 4 | 6 | 8 | 10 | 12 | 14 | 16

| 18

attribute=ProcCoreSpeed setting=<string>

attribute=ProcExecuteDisable setting=Enabled | Disabled

attribute=ProcHwPrefetcher setting=Enabled | Disabled

attribute=ProcVirtualization setting=Enabled | Disabled

attribute=QpiBandwidthPriority setting=InputOutput | Compute

attribute=QpiSpeed setting=MaxDataRate | 9GTps| 8GTps | 7GTps |

6GTps

attribute=RtidSetting setting=Enabled | Disabled

attribute=Proc1ControlledTurbo

– Proc4ControlledTurbo

setting=Disabled | ControlledTurboLimit |

ControlledTurboLimitMinus1 |

ControlledTurboLimitMinus2 |

ControlledTurboLimitMinus3

attribute=ProcConfigTdp setting=Nominal | Level1 | Level2

attribute=ProcATS setting=Enabled | Disabled

NOTE: The option is read-only if

ProcVirtualization is set to Disabled.

attribute=ProcX2Apic Enabled | Disabled

NOTE: The option is read-only if

ProcVirtualization is set to Disabled.

SATA Settings attribute=EmbSata setting=Off | AtaMode | RaidMode | AhciMode

NOTE: If AHCI is not supported on the

system, AhciMode is not displayed. If

Software RAID is not supported on the system

RaidMode is not displayed.

attribute=eSataPort1 setting=Off | Auto

NOTE: If eSATA is not supported on the

system, eSataPort1 is not displayed.

attribute=eSataPort1Capacity setting=<string>

attribute=eSataPort1DriveType setting=<string>

attribute=eSataPort1Model setting=<string>