Reference Guide

Table 20. BIOS Setup Settings on PowerEdge 13
th
generation of PowerEdge systems
Group name=value pair 1 attribute= name=value pair 2 setting=
BIOS Option
Settings
attribute=BootSeq sequence=aliasname1, aliasname2,..... aliasnameN
NOTE: The attribute is read-only if
BootModeis set to Uefi.
attribute=HddSeq sequence=aliasname1, aliasname2,..... aliasnameN
NOTE: The attribute is not available on the
system if there is no hard-disk drive on the
system. The attribute is read-only if
BootModeis set to Uefi.
Boot Settings attribute=BootMode setting=Bios | Uefi
attribute=BootSeqRetry setting=Enabled | Disabled
attribute=HddFailover setting=Enabled | Disabled
attribute=SetBootOrderFqdd1–
SetBootOrderFqdd16
setting=<string>
attribute=SetLegacyHddOrder
Fqdd1–
SetLegacyHddOrderFqdd16
setting=<string>
Embedded Server
Management
attribute=FrontLcd setting=None | UserDefined | ModelNum |
Advanced
attribute=UserLcdStr setting=<string>
Integrated
Devices
attribute=EmbVideo setting=Enabled | Disabled
attribute=IntegratedNetwork1 setting=Enabled | DisabledOs
attribute=IntegratedNetwork2 setting=Enabled | DisabledOs
attribute=IntegratedRaid setting=Enabled | Disabled
attribute=IntegratedSas setting=Enabled | Disabled
attribute=InternalSdCard setting=On | Off
attribute=InternalSdCardRedun
dancy
setting=Mirror | Disabled
attribute=InternalUsb setting=On | Off
attribute=IoatEngine setting=Enabled | Disabled
attribute=OsWatchdogTimer setting=Enabled | Disabled
attribute=SriovGlobalEnable setting=Enabled | Disabled
attribute=UsbPorts setting=AllOn | OnlyBackPortsOn | AllOff
attribute=Usb3Setting setting=Auto | Enabled | Disabled
64