Reference Guide

Power Budget

Attribute : Enable Power Cap

Values : Enabled

Attribute : Power Cap

Values : 400 W (56%)

NOTE: Power budget requires license to report the details. If the appropriate license is not installed

or has expired, the system does not display the power budget details. For more information, see the

Dell License Manager Guide at dell.com/support/manuals.

Omreport Chassis Pwrmonitoring Or Omreport Mainsystem Pwrmonitoring

Use the omreport chassis pwrmonitoring or omreport mainsystem pwrmonitoring command to view the

properties of the system’s power consumption. The values display either in Watts or BTU/Hr based on the

configuration. Type:

omreport chassis pwrmonitoring

omreport mainsystem pwrmonitoring

For each power monitoring profile in the system, values display for the following fields:

• Power Consumption Status

• Probe Name

• Reading

• Warning Threshold

• Failure Threshold

• Amperage: Location and Reading

• Power Tracking Statistics

• Energy Consumption

• Measurement Start Time

• Measurement Finish Time

• Reading

• System Peak Power

• System Peak Amperage

NOTE: The omreport chassis pwrmonitoring or omreport mainsystem pwrmonitoring command is

applicable only on systems that support PMBus and that have hot-swappable power supplies and

not systems that have a fixed, non-redundant power supply installed.

NOTE: Power monitoring requires license to report the details. If the appropriate license is not

installed or has expired, the system does not display the power consumption details of the system.

For more information, see the Dell License Manager Guide at dell.com/openmanagemanuals.

NOTE: To maintain consistency across the commands, the output format of this command and the

subsequent command levels has changed. So, you may have to change the user scripts as

applicable.