Reference Guide

Omreport Chassis Frontpanel Or Omreport Mainsystem Frontpanel

Use the omreport chassis frontpanel or omreport mainsystem frontpanel command to view if the front

panel button control settings, such as the Power button and/or Nonmasking Interrupt (NMI) button (if

present on the system), are enabled or disabled.

If the Power button override is present on the system, check whether the Power button override is

enabled or not. If enabled, the Power button turns the power to the system On and Off.

If the NMI button is present on the system, check whether the NMI button is enabled or not. Use the NMI

button to troubleshoot software and device errors when using certain operating systems.

The Front Panel LCD Security Access displays if the front panel encryption access information is set to

View, Modify, or Disable.

The Front Panel LCD Information displays information such as service tag, remote indication status, and

so on.

Omreport Chassis Fru Or Omreport Mainsystem Fru

Use the omreport chassis fru or omreport mainsystem fru command to view FRU information. When you

type:

omreport chassis fru

omreport mainsystem fru

Server Administrator displays a summary of the system’s FRU information. This information is available in

the Server Administrator GUI, SNMP, and Common Information Model and is primarily used to support

troubleshooting activities.

Omreport Chassis Info Or Omreport Mainsystem Info

Use the omreport chassis info or omreport mainsystem info command to see a summary of installed

component versions. Type:

omreport chassis info index=n

omreport mainsystem info index=n

The index parameter specifies a chassis number and is optional. If you do not specify the index, Server

Administrator displays summary chassis information for each chassis. If you specify the index, Server

Administrator displays summary information for a specific chassis.

NOTE: If iDRAC is installed, Server Administrator displays the Lifecycle Controller version. If BMC is

installed, Server Administrator displays the USC version.

Depending on the system’s configuration, you may notice the following output:

Index : 0

Chassis Name : Main System Chassis